Lastest EmuNation 4.1.0.x

Status
Not open for further replies.

marokino08

Super VIP
Messages
7,462
EmuNation-SC939.1

Code:
rev 939.1 
Added set computer time and date from the sat stream. Never have a recording start at the wrong time again. New ini file entry needed under [Menu Options] SetClock=1 to set the clock on first channel tune. Menu item, under 'options', turns function on/off and menu item to set clock now. 

N.B. Your computer is keeping its clock in UTC, formerly known as GMT. Windows calculates local time from UTC. Depending on your time zone, its 'tomorrow' around 7:00 or 8:00 in the evening. Console display of time set is in UTC, so don't be surprised by it being 'tomorrow' before it seems to be so, in your local time. 

N.B. Vista users, program app must "Run As Administrator" for time set to work. If you have not already been running as admin you MAY need to copy the contents of \users\{yourusername}\appdata\local\virtualstore\program files\dvbprogramname\ including its subdirectories to \program files\{dvbprogramname} to maintain your settings. If you try to set the time in Vista without admin privileges, it will tell you that you have and the function will turn itself off.
 
Last edited:

marokino08

Super VIP
Messages
7,462
Code:
[B]rev 939.2

Fix for freezing on map3c.
Fix for emm processing on startup in DVBPlus.[/B]
 
Last edited:

marokino08

Super VIP
Messages
7,462
EmuNation 4.0.0.0

Information regarding EmuNation 4.0.0.0
=======================================
MAP3C correction.

Added set computer time and date from the DVB stream capability.
New ini file entry needed under [Menu Options] SetClock=1 to
set the clock on first channel tune. Menu item, under 'options',
turns function on/off and menu item to set clock now.

The default for this option is off.

Note 1: Console display of time set is in UTC/GMT, so don't be surprised
by it being off by several hours from your current local time.

Note 2: Vista users, the DVB program app must "Run As Administrator" for
time set to work. Turning User Access Control (UAC) off may
also work.
[rant]I cannot possibly describe how much I detest Vista UAC.[/rant]

This feature shamelessly stolen from emun-sc.
 
Last edited:

marokino08

Super VIP
Messages
7,462
Information regarding EmuNation 4.1.0.0
=======================================
Map 3d added.
Stub Nagra3 class created. Don't get excited, it does not work.
This is just prepwork for (hopefully) the future.
 

bozomustafa_68

Registered
Messages
16,935
EmuNation-sc rev 939.3

Code:
Fix for map 3d
You'll notice stubs for n3, it does NOT NOT NOT work with n3, you can log the encrypted ecm, but thats all.
 

marokino08

Super VIP
Messages
7,462
EmuNation-sc rev 939.4

EmuNation-sc rev 939.4

Rename the dll is back, any name will do. ini file must be the same as dll. See notes from 938.5 and 938.7. Works with TSR too.
Added map timing tracker, console map display will show timings added to the tracker, announce timing changes. Tracker resets on channel change.
 
Last edited:

marokino08

Super VIP
Messages
7,462
EmuNation-sc rev 939.5
================================================================
rev 939.5

Fix for Map 46
 

marokino08

Super VIP
Messages
7,462
Code:
[B]rev 939.6

Fixed a lil error I introduced into map3e while fixing map46. 
Configurable priorities, see 938.7 below, fixed to now work 
with multiple system ids. 
Providers.conf never worked right and support 
has been dropped.
Radegast and newcamd cardclients fixed. Sample 
.conf file added.
New [SC] ini entry CCDump turns on/off raw data 
dumps to console for cardclient and smartcard.
ST19Com and ST19Echo settings activated in ini. 
Set ST19Com to nonexistant port if the smartcard 
interface is not in use. You can ignore 
the Com port opening error if not in use.

Be sure you have a Nagra3=-15 or something
, as there are n3 stubs that show as a valid 
protocol (wishful thinking). 
N3 ca-ids are valid for cardsharing, 
if supported by your server. 
Be careful of unintended consequences, 
on gc irdeto is sometimes a valid protocol, 
but i bet you don't have valid keys. 
Check your ini against the distribution file. 
All priorities are negative numbers.
 -3 is higher than -5. 
No number may be less -20 nor higher than -1.

You can change between smartcard,
 cardclient and native code 
on the fly by inserting/removing 
card and retuning the channel, 
if priorities are set appropriately. 
You can not change priorities on the fly.

Finally, before you say cardclient 
doesn't work, check your firewall settings.[/B]
 

bozomustafa_68

Registered
Messages
16,935
Information regarding EmuNation 4.1.0.2
===================================
Radegast cardclient working compliments of tryit@DVBN. Newcamd already worked.
cardclient.conf sample file added to distribution.
Works with N3 *if* the server works with N3. Newcamd has been shown to work
with N3 and emunation already. Radegast doesn't work with N3 yet but supposedly is
close. For now you can only have one line in cardclient.conf active at a time so
to switch from bev to dish (for example) you need to swap the conf lines
and restart the DVB application.


Tweaks to the priority code.

Four additional notes:
1) EMM processing does not work for newcamd. so do not turn it on.
2) Before posting that this does not work, make sure you have the ports open in your firewall/router.
3) If you have problems running as you did before you can try setting (in emunation.ini):
[System Priorities]
Nagra3=-19
4) To run as a cardclient set (in emunation.ini):
[System Priorities]
Cardclient=-2
 

marokino08

Super VIP
Messages
7,462
EmuNation 4.1.0.3

Information regarding EmuNation 4.1.0.3
===================================
Map3a handled.
Corrected problem with nagra3 priority reading from ini file and
made corresponding change to ini file.

Make sure you have the nagra3 priority set to -19 in the INI file or use the INI file in the zip file


 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.4

Information regarding EmuNation 4.1.0.4
===================================
Map3A timing correction.
Cardshare EMM processing working for newcamd.
You shouldn't enable EMM processing on your client without permission
of the server operator.
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.5

Information regarding EmuNation 4.1.0.5
===================================
Minor fix for freezing that some were seeing.
Cardshare EMM processing working for radegast.
You still shouldn't enable EMM processing on your client without permission
from the server operator.
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.6

Information regarding EmuNation 4.1.0.6
===================================
Workaround hack for MyTheater (older versions) and Agarwals MDAPI filter apps
such as MediaPortal problem which was crashing EmuNation on some channel changes.
Minor fix for potential problem switching from unscrambled to scrambled channels.
Fix to insure that the proper caid is always being used. Applies to all
systems but was required for cardsharing to work properly.
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.7

Information regarding EmuNation 4.1.0.7
==================================
Hopefully the last fix for MDAPI and MT crashes. Thanks to a helper
for the remote debugging. You know who you are.
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.8

Information regarding EmuNation 4.1.0.8
===================================
Map timing fix.
 

marokino08

Super VIP
Messages
7,462
EmuNation 4.1.0.9

Information regarding EmuNation 4.1.0.9
===================================
Cardclient fix for motorized dishes.
Newcamd fix to allow for Nagra3.
Change for DVBPlus to work with cardclients (sat position).
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.10

Information regarding EmuNation 4.1.0.10
====================================
Map2e handling addition.
Added a few more console messages to better show what is going on during cardsharing.
Added DVBMax to list of applications known to work with Emunation in this readme.
 

tani1

Staff member
Super Moderator
Messages
17,767
EmuNation 4.1.0.11

Information regarding EmuNation 4.1.0.11
====================================
Corrections to allow EMM processing for Nagra3.
(Don't get too excited, N3 still only works for cardsharing).
Modifications to allow bwtter EMM-G/S/U processing so if a PPV is purchased,
the card can be updated by one of the connected clients. Newcamd only and
confirmed working correctly with RQCS and NewCS servers. You must be
authorized to pass EMM by the server operator.
Corrections to gbox code (not 100% sure that it works, let me know if you try it).
 
Status
Not open for further replies.
Top