IQmonitor [Blind Scan]

TheHighLander

Super VIP
Messages
4,144
Version 2.2.0.3

Code:
* The work between IQmonitor and VLC has been improved,
** A button with "Stop VLC" was brought in.
***And more..
#Simply, replace the exe.file of 2202 folders with this new exe.

Thanks,strannik.
 

rama11

Feed Hunter
Messages
16,310
IQmonitor_2404

THX strannik

1 . Added PoP menu, which can be called by right mouse click. It has a number of options:

- Jamp to Frequency - by this command, the operating frequency pointer is transferred to the frequency,
on which the PoP menu was called. This can significantly reduce scan time.
For example, when scanning a satellite 10 ° E, when the program reaches the frequency of 11.7 GHz,
after which the satellite frequency band of 9 ° E begins, you need to set the cursor to the frequency
12.5 GHz, call the PoP menu and click on Jamp to Frequency - the scanning process will
continue from this frequency ;

- Feed Report - launches the procedure for analyzing the constellation constellation and determining
(predicting) the transponder parameters at the click frequency;

- Dynamic Spectrum - starts the dynamic ( real time ) spectrum formation procedure
in the range of +/- 25 MHz from the click frequency. Moreover, the click can be done anywhere, even on an
empty tablet;

- Tune to frequency is an option that will appeal to both experienced users and beginners.
With one click, you tune to the transponder with the click rate of the PoP menu call and
automatically receive all information from the transport stream (which is written
to disk), including the list of programs and their SIDs. Since the
transport stream is broadcast in parallel using the UDP protocol, you just need to select the
desired program from the list , and it will be automatically shown by the VLC player. Or you can
run MPC-BEplayer. If you want, you can launch TransEdit , DVB Inspector , TSReader and even ABC 4T2 Analizir for in-depth
analysis with one click without a key and copyright infringement (in demo mode); - Set Option - opens the Style panel and allows you to change parameters during scanning; - Go to Finish - performs the transition to the final scanning frequency and allows the process to be completed correctly, but ahead of schedule. 2 . Added Clear the loop option for advanced users to clear
the interval before and immediately after the peak of the transponder from Raman interference. The HR spectrum is
becoming cleaner and more readable.

3 . Another option for advanced users - Expand RX band - allows you to evaluate the
ability to receive transponders for the frequency range that are set on the
spectrum panel . When this option is enabled
, another frequency is written on the frequency indicator of the cursor position under it , which shows the true frequency of the transceiver,
if the reception at the cursor frequency occurs at the third harmonic of the local oscillator of the card's tuner.

4 . Fixed program signature errors on automatic screenshots of all reporting
materials that are created in the process of studying satellite signals.
 
Top