ipbox91hd + oscam local client - help!

kytar

Registered
Messages
11
Ciao,
sono bloccato nel cercare di far diventare il vecchio ipbox91 (dgs) messo in camera da letto un client del dreambox clone della sala.
ho installato oscam in entrambi ma non vado oltre a questa informazione :

00:06:37 c plain dvbapi-client granted (anonymous, au=off)
00:06:37 c dvbapi: WARNING: no PTI devices defined, stapi disabled
00:06:37 c ERROR: stapi: setting up stapi failed.

ho messo la oscam 9143 su ipbox mentre sul sunray 6454 (funzionante).

Dove posso guardare per cercare di andare avanti?
L'errore non mi "parla"
 

kytar

Registered
Messages
11
Aggiungo come info che da webif mi da queste info:

c [DVBAPI] Detected /dev/stapi/stpti4_ioctl Api: 2, userconfig boxtype: 5
p ccc_proxy configuration error!

dove ccc_proxy è il label dell'altro decoder
 

sattys

Registered
Messages
56
Ciao,
sono bloccato nel cercare di far diventare il vecchio ipbox91 (dgs) messo in camera da letto un client del dreambox clone della sala.
ho installato oscam in entrambi ma non vado oltre a questa informazione :

00:06:37 c plain dvbapi-client granted (anonymous, au=off)
00:06:37 c dvbapi: WARNING: no PTI devices defined, stapi disabled
00:06:37 c ERROR: stapi: setting up stapi failed.

ho messo la oscam 9143 su ipbox mentre sul sunray 6454 (funzionante).

Dove posso guardare per cercare di andare avanti?
L'errore non mi "parla"
English, please!!!
 

sattys

Registered
Messages
56
Aggiungo come info che da webif mi da queste info:

c [DVBAPI] Detected /dev/stapi/stpti4_ioctl Api: 2, userconfig boxtype: 5
p ccc_proxy configuration error!

dove ccc_proxy è il label dell'altro decoder
English please!!!
 

kytar

Registered
Messages
11
I'm sorry ... this is the english version
I'm trying to understand how i can use an old ipbox 91hd as client for a dreambox clone with oscam.
But i'm stuck .... i've this error on the ipbox (client)

00:06:37 c plain dvbapi-client granted (anonymous, au=off)
00:06:37 c dvbapi: WARNING: no PTI devices defined, stapi disabled
00:06:37 c ERROR: stapi: setting up stapi failed.

i've oscam 9143 on the ipbox while the dreambox clone has oscam 6454 (working).


c [DVBAPI] Detected /dev/stapi/stpti4_ioctl Api: 2, userconfig boxtype: 5
p ccc_proxy configuration error!

is there any way to understand WHY the configuration is failed?

oscam.server

[reader]
label = ccc_proxy
enable = 1
protocol = cccam
device = x.x.x.x,11003
user = dvbapi
password =
group = 1
cccversion = 2.1.4
ccckeepalive = 1
audisabled = 1
lb_weight = 500
 

cazame2008

Registered
Messages
15
I'm sorry ... this is the english version
I'm trying to understand how i can use an old ipbox 91hd as client for a dreambox clone with oscam.
But i'm stuck .... i've this error on the ipbox (client)

00:06:37 c plain dvbapi-client granted (anonymous, au=off)
00:06:37 c dvbapi: WARNING: no PTI devices defined, stapi disabled
00:06:37 c ERROR: stapi: setting up stapi failed.

i've oscam 9143 on the ipbox while the dreambox clone has oscam 6454 (working).


c [DVBAPI] Detected /dev/stapi/stpti4_ioctl Api: 2, userconfig boxtype: 5
p ccc_proxy configuration error!

is there any way to understand WHY the configuration is failed?

oscam.server

[reader]
label = ccc_proxy
enable = 1
protocol = cccam
device = x.x.x.x,11003
user = dvbapi
password =
group = 1
cccversion = 2.1.4
ccckeepalive = 1
audisabled = 1
lb_weight = 500

plz post your oscam.conf.
 

kytar

Registered
Messages
11
here the oscam.conf

[global]
disablelog = 1
logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0

[cache]

[newcamd]
port = 11000@09CD:000000
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
key = 0102030405060708091011121314

[cccam]
port = 11003
serverip = 192.168.1.8
nodeid = xxxxxxxxxxxxx
version = 2.1.4
reshare = 3

[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
user = dvbapi
boxtype = ipbox

[webif]
httpport = 8189
httpallowed = 127.0.0.1,192.168.0.0-255.255.255.255
httprefresh = 55
 

kytar

Registered
Messages
11
Tested with boxtype = ipbox-pmt but same results :( i'm going crazy

esecuting oscam -v

14:44:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 20350
14:44:17 0 s signal handling initialized
14:44:17 5653B8 h webif: decompressed 54836 bytes back into 156492 bytes
14:44:17 5653B8 h HTTP Server running. ip=0.0.0.0 port=8888
14:44:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
14:44:17 0 s waiting for local card init
14:44:18 0 s init for all local cards done
14:44:18 0 s anti cascading disabled
14:44:18 56A608 c plain dvbapi-client granted (anonymous, au=off)
14:44:18 56A608 c dvbapi: WARNING: no PTI devices defined, stapi disabled
14:44:18 56A608 c ERROR: stapi: setting up stapi failed.
 

cazame2008

Registered
Messages
15
Tested with boxtype = ipbox-pmt but same results :( i'm going crazy

esecuting oscam -v

14:44:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 20350
14:44:17 0 s signal handling initialized
14:44:17 5653B8 h webif: decompressed 54836 bytes back into 156492 bytes
14:44:17 5653B8 h HTTP Server running. ip=0.0.0.0 port=8888
14:44:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
14:44:17 0 s waiting for local card init
14:44:18 0 s init for all local cards done
14:44:18 0 s anti cascading disabled
14:44:18 56A608 c plain dvbapi-client granted (anonymous, au=off)
14:44:18 56A608 c dvbapi: WARNING: no PTI devices defined, stapi disabled
14:44:18 56A608 c ERROR: stapi: setting up stapi failed.
OK WICH BINARY YOU ARE USING?
 

kytar

Registered
Messages
11
[SifTeam]$ oscam -V
Version: oscam-1.20-unstable_svn-r9143
ConfigDir: /var/keys

Web interface support: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: yes
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: yes
ghttp: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
*** Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: yes
cardreader_stinger: yes
 

flgh

Registered
Messages
45
HI!
I have a IPBox 910HD with SWF-E2_V5.4.4 Image. And only the oscam_ymod is running in my Box.

I have in my oscam.conf Boxtype=Dbox2
[dvbapi]
enabled = 1
pmt_mode = 0
boxtype = dbox2
user = dvbapi
au = 0
request_mode = 0

Reagards flgh
 

kytar

Registered
Messages
11
thank you

so the suggestion is to install SWF-E2_V5.4.4 Image
Were i can found it? i've googled without any success ...
 
Top