Now is posible dvb-t chanells Dm 800
It is now possible thanks to the research and the work of many people in Tododream Nabilosat, sifteam & Ihad
many thanks to all of them
and now sat-universe investigate more about it
Manual o infos original by pinkopallino69 but the hard work is all above
Dm 800 & usb dvb-t tuner
I finally rose again to obtain a stable configuration to run a receiver USB DVB-T (in my case a cinergyT2) directly on the dm800.
My configuration:
dm800 with GP 4.6 (driver 23/12/2009)
CinergyT2 USB DVB-T ----- more infos Here
The standard driver 2.6.12 kernel tree does not work well, 'we used a modified driver.
Even the track and usbtuner 'was adapted to work with DVB-T
Are these files as attachments on the board ihad thread reference. If the admins allow me place files here.
I want to clarify that no fruits of my labor (I limited to test them) but others
Homey to thank in particular the sources and patches for Roland and Liviu.
Attached are some screenshots with dm800 running with the receiver usb dvb-t.
also work the HD channels!
The only problem I encountered and 'that enigma2 crashes for "Out of memory" if you run an "automatic scan" (I posted on the board ihad a log) while it is' okay if you do a "manual scan with a frequency at a time.
For the rest I already apply the devices' to operate the vTuner posted:
1) terrestrial.xml suitable Italy
2) a valid driver for the DVB-T USB device suitable for the 2.6.12 kernel of dm800
3) ko insmod ***. (load the device driver)
4). / Usbtuner (start usbtuner)
5) killall -9 enigma2 (restart enigma2)
I hope that with this info we can keep on learning more
It is now possible thanks to the research and the work of many people in Tododream Nabilosat, sifteam & Ihad
many thanks to all of them
and now sat-universe investigate more about it
Manual o infos original by pinkopallino69 but the hard work is all above
Dm 800 & usb dvb-t tuner
I finally rose again to obtain a stable configuration to run a receiver USB DVB-T (in my case a cinergyT2) directly on the dm800.
My configuration:
dm800 with GP 4.6 (driver 23/12/2009)
CinergyT2 USB DVB-T ----- more infos Here
The standard driver 2.6.12 kernel tree does not work well, 'we used a modified driver.
Even the track and usbtuner 'was adapted to work with DVB-T
Are these files as attachments on the board ihad thread reference. If the admins allow me place files here.
I want to clarify that no fruits of my labor (I limited to test them) but others
Homey to thank in particular the sources and patches for Roland and Liviu.
Attached are some screenshots with dm800 running with the receiver usb dvb-t.
also work the HD channels!
The only problem I encountered and 'that enigma2 crashes for "Out of memory" if you run an "automatic scan" (I posted on the board ihad a log) while it is' okay if you do a "manual scan with a frequency at a time.
For the rest I already apply the devices' to operate the vTuner posted:
1) terrestrial.xml suitable Italy
2) a valid driver for the DVB-T USB device suitable for the 2.6.12 kernel of dm800
3) ko insmod ***. (load the device driver)
4). / Usbtuner (start usbtuner)
5) killall -9 enigma2 (restart enigma2)
I hope that with this info we can keep on learning more
