How to Boot to the Advanced Boot Options in Windows 7

Fariad

Registered
Messages
1
How to Boot to the Advanced Boot Options in Windows 7

Here's How:

1. Turn on or restart the computer.

2. Press F8 on your keyboard about every second until you see the screenshot below.
NOTE: If the Windows startup logo appears, you will need to repeat steps 1 and 2 again. If you dual boot, then you will need to select the OS you want to use the Advanced Boot Option for and then press F8.

3. Use the arrow keys to select an advanced option to start Vista into and press Enter. (See screenshot above)
NOTE: See the table below for a description of each option.
Advanced Option Description
Repair Your Computer Shows a list of system recovery tools you can use to repair startup problems, run diagnostics, or restore your system. This option is usually only available if the tools are installed on your computer's hard disk. For example, when you only have a OEM recovery partition instead of a Windows 7 installation disc. If you have a Windows 7 installation disc, the System Recovery Options are located on the installation disc.

Safe Mode This starts Windows 7 with a minimal set of drivers and services.

Safe Mode with Networking This starts Windows 7 in safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.


Safe Mode with Command Prompt This starts Windows 7 in safe mode with a command prompt window instead of the usual Windows interface. To exit from here, press Ctrl+Alt+Delete or type Exit and press Enter.

Enable Boot Logging Creates a file named ntbtlog.txt, that lists all the drivers that are installed during startup and that might be useful for advanced troubleshooting.

Enable Low Resolution Video (640 X 480) Starts Windows 7 using your current video driver and using low resolution and refresh rate settings. You can use this mode to reset your display settings, or to use a television monitor with your computer if needed.

Last Know Good Configuration (advanced) Starts Windows 7 with the most recent registry and driver configurations that worked successfully. Every time you turn your computer off and Windows 7 shuts down successfully, important system settings are saved in the registry. You can use those settings to start your computer if a problem occurs. For example, if a new driver for your video card is causing problems, or an incorrect registry setting is preventing Windows 7 from starting correctly, you can restart your computer using Last Known Good Configuration.

Directory Services Restore Mode Starts Windows 7 domain controller running Active Directory so that the directory service can be restored. This option is intended for IT professionals and administrators.

Debugging Mode Starts Windows 7 in an advanced troubleshooting mode intended for IT professionals and system administrators.

Disable Automatic Restart on System Failure Prevents Windows 7 from automatically restarting if an error causes Vista to fail. Choose this option only if Vista is stuck in a loop where Vista fails, attempts to restart, and fails again repeatedly.

Disable Driver Signature Enforcement Allows drivers containing improper signatures to be temporarily installed.

Start Windows Normally Starts Windows 7 in its normal mode to the logon screen or user desktop. This can be helpful after a improper shutdown.
 
Top