Help needed

[DanAddison]

can someone here help me please, i have my 100cm sat dish ground mounted attached to motor and am able to recieve thor 0.8w sat channels and feeds just fine but when i switch satellites i get no signal please help thanks

 

[kakkaratul]

can someone here help me please, i have my 100cm sat dish ground mounted attached to motor and am able to recieve thor 0.8w sat channels and feeds just fine but when i switch satellites i get no signal please help thanks

WHERE DO YOU LIVE IN EUROPE

 

[DanAddison]

can someone here help me please, i have my 100cm sat dish ground mounted attached to motor and am able to recieve thor 0.8w sat channels and feeds just fine but when i switch satellites i get no signal please help thanks

im in uk

 

[DanAddison]

WHERE DO YOU LIVE IN EUROPE

UK i am able to recieve thor 0.8w and lock onto feeds but when i move my dish to other sats, 28.2e, 23.5e, 19.2e, 10e, 16e and 7e my dish moves but i dont get signal for some reason, unless my dish is to low to the ground maybe?

 

[kakkaratul]

can someone here help me please, i have my 100cm sat dish ground mounted attached to motor and am able to recieve thor 0.8w sat channels and feeds just fine but when i switch satellites i get no signal please help thanks

WHERE DO YOU LIVE IN EUROPE

 

[kakkaratul]

UK i am able to recieve thor 0.8w and lock onto feeds but when i move my dish to other sats, 28.2e, 23.5e, 19.2e, 10e, 16e and 7e my dish moves but i dont get signal for some reason, unless my dish is to low to the ground maybe?

YOU NEED THE EXPERT ON THE DISH WHICH HE CAN COME AND FIX THE SATTELITE THEN YOU WILL GET ALL THE SIGNALS

 

[DanAddison]

WHERE DO YOU LIVE IN EUROPE

UK

 

[DanAddison]

YOU NEED THE EXPERT ON THE DISH WHICH HE CAN COME AND FIX THE SATTELITE THEN YOU WILL GET ALL THE SIGNALS

no installers will do it in my area, i did get them sats before my dish came down in the wind but now i put it back up on a new ground mount im unable to get signals on other sats

 

[dj999]

Where in uk

 

[samir mokhtari]

Motor H TO H ?

 

[samir mokhtari]

To obtain a suitable signal, the dish holder must be level. Use the scale on all four sides Secondly, the intermediate satellite, for example, I have in Algeria 4.9E It varies from region to region To find out the median Sattelite , download the Sat Finder app, activate Gps, it will give you coordinates, send a picture to me, and I will tell you what the median is Then you adjust the degree of height of the engine, for example, I am 35° Then you raise the signal of the intermediate satellite with the highest signal from the motor, and then you adjust the motor from the screws well You will get an excellent signal Any random installation will not get a result This is for the HTOH automatic motor

The middle Sattelite and the altitude you mentioned are just examples If you want to know the degree of engine lift and the appropriate satellite, just send me a picture of the coordinates

 

[DanAddison]

I know all that im just saying since i added my dish to my ground mount im not able to pick other sats up for aome reason

 

[jovie]

you cant get the other satellites because something is in the way try moving your dish
off the satellite if still nothing your either to high or two low regards jovie

 

[kegnkiwi]

Hey dan where was the dish located before, you mention the dish came down in the wind was it on the same ground mount or located up on a building? Do you think the dish + motor could have taken a bump and moved them slightly? Did you do a full install from scratch or just take the dish and motor and add it to a ground mount.

 

[DanAddison]

Hey dan where was the dish located before, you mention the dish came down in the wind was it on the same ground mount or located up on a building? Do you think the dish + motor could have taken a bump and moved them slightly? Did you do a full install from scratch or just take the dish and motor and add it to a ground mount.

the same place as it is now, just its now on a ground mount base,yea i just took it from the old pole and added it to the ground mounted base pole instead,

 

[kegnkiwi]

Hi Dan, can you check with a spirit level that your ground mount is totally vertical? Even if it's off a fraction the further away from 1w you go the further out it will get. If you think it's totally plum when you drive your dish to say 28e have you tried nudging your dish in the motor settings either east or west slightly to see if you can lock the signals?

 

[DanAddison]

yes its plumb because i could lock onto 0.8w just fine lastnight, but im now going back to double check everything again just incase

 

[DanAddison]

update: turns out the ground mount pole is showing as not level for some reason yet i can get signal on thor 0.8w just fine

 

[kegnkiwi]

Dan 0.8w is what we use as the reference satellite in the uk. If you took down your dish and motor guessing that would have been set at 0.8 before you took it down and then transferred it to the ground mount. If you put the motor on the pole and rotated the motor on the pole until you got thor this still may mean the pole is out slightly. 0.8w is the top of the arc for us.

++if your pole is even ever so slightly out you will pick up 0.8 but as you move the motor east or west it will miss those sats. Also if your ground mount is not sturdy it will miss those sats as the pole rocks left or right.+++

 

[manic01]