ERT Greece Channels (3.1E) FixedControlWord**CHAT*No keys

[ERRIPO]

how to do that ERT channels works with oscam-ymod 1860,using softcam.key ?

 

[Gregory90]

ERT1HD, ERT2HD ERT3HD on 39°E

Hello everybody,

Today there are changes in the ERT programs to 12224.00 H and 12241.00 H:

ERT Sports HD was switched off on 12224.00MHz H.
ERT1 HD is now on air on this program slot with the previous parameters (encoded in BISS)

ERT2 HD is new at 12241.00 H, also new is a channel with the ID "-."(encoded in BISS)
The ERT2 HD is currently being read in as fta, but the channel will only be visible, if the channel "-." is before selected. (old BISS keys!)
In addition, ID ERT3 HD is also read in, but nothing is on the air yet

regards

 

[georgeflu]

all the above channels are encrypted in biss , and as i saw today there are a lot posts about...

the problem is (as in the past in the sd transmitions) that the encryption is not transmitted.

cccam can't decode the channels,
mgcamd is decoding the channels
oscam needs a few lines in dvbapi ,
(in satdreamgr image, there is a "trick" that gives encryption)

in non linux receivers,depends the software.

all the channels are transmitting program, since 02:00 time in greece (+2 zone) .

 

[pig]

does any one know if the new ert hd channels on 39e open with same biss or need to find new ones

 

[dray1]

Add in oscam.dvbapi this

A: ::000A
A: ::0014
A: ::0028
A: ::0001
A: ::0002

If you use constant.cw add this ( replace @@ with the known keys )


FFFF:000000:000A:0104:1FFF::A1 B2 C3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ;ERT 1 (3.0�E)
FFFF:000000:0014:0100:1FFF::A1 B2 C3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ;ERT 2 (3.0�E)
FFFF:000000:0028:0102:1FFF::A1 B2 C3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ;ERT1 HD (3.0�E)
FFFF:000000:0001:0100:1FFF::A1 B2 C3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ;ERT2 HD (3.0�E)
FFFF:000000:0002:0101:1FFF::A1 B2 C3 @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ;ERT3 HD (3.0�E)

 

[pig]

If you use constant.cw add this ( replace @@ with the known keys )

@@ are these the same as the old keys for ERT 2

 

[dray1]

Yes my friend , the same .

Dont forget also to add the above lines to oscam.dvbiapi .

 

[Gregory90]

jassu gorgeflu,

I use an Apebox C2 4K. it is a receiver without E2

ERT1 HD: is displayed without any problems.
ERT2 HD: via the detour coded channel "-." having to call beforehand.
ERT3 HD: EPG is displayed, picture and sound are missing. Not even after going through "-.":mecry:
The SID and keys have been entered correctly in the EMU.
There seems to be a different problem here

regards

 

[georgeflu]

it isn't different...
it is something common to many receivers. it is the "flag" of encryption. in linux receivers there is a "detour"

in non linux receivers, depends the software. for a few of them could be a newest software which could give a solution, or for other, a force unlock, a settings edit maybe... ,or not supported!

but in the past, the same happened in sd ert services, and also to ertsportHD which is now ert1 hd. so somehow it fixed, if you can find something about...

the -. channel bring the encryption and it is ert2HD too

 

[vakula]

it isn't different...
it is something common to many receivers. it is the "flag" of encryption. in linux receivers there is a "detour"

in non linux receivers, depends the software. for a few of them could be a newest software which could give a solution, or for other, a force unlock, a settings edit maybe... ,or not supported!

but in the past, the same happened in sd ert services, and also to ertsportHD which is now ert1 hd. so somehow it fixed, if you can find something about...

the -. channel bring the encryption and it is ert2HD too

give a try here
maybe helped
https://www.sat-universe.com/showpost.php?p=2036974961&postcount=6

 

[lojze1953]

Yes, the Amiko 8260+ ERT3 HD does not work either. ERT2 HD is ok. There have never been these problems with ClarkeTech.

 

[william-1]

Working OK here on these boxes,
Octagon SX88 series all load OK
TM6902HD & 5402HD working here
Edision Prima S2,
Golden Interstar,
Just follow the info in this thread to update your box.

 

[william-1]

https://www.flysat.com/hellassat.php

 

[empb]

all the above channels are encrypted in biss , and as i saw today there are a lot posts about...

ERT is NOT Biss Encrypted there is no CaID 2600 (or CaID 2610 Biss2) present, still very similair to Biss and on most devices works the same as Biss, but this is why some receiver/decoders have issues.....

ERT 2 HD duplicate with ID "-." (is encoded in Biss)

non of the rest use CaID 2600 (Biss)

and are still (SD) FixedCW (Fixed or Static not changing Control Word) as are the new HD versions:

https://www.sat-universe.com/showthread.php?t=272427

The Biss Encrypted Digea Greece Channels on 3.1E should switch the 12702 H & 12720 H S/R 13960 transmissions to 1080i HD soon. 12737 H 15055 remaining for SD. As Digea has already confirmed it wants HD versions of the channels to be supplied as ERT had already announced its intended switch to HD (and discontinuation of ERT Sports)

 

[william-1]

Digea Greece
This transponder 12737 H 15055 3/4 DVB-S2/QPSK MPEG-4 will probably replace these 2 transponders:-

12702 H 13960 3/5 & 12720 H 13960 3/5 in the new year.
https://www.flysat.com/e3b.php

 

[georgeflu]

no, for the moment it will not replace...

for a part time both 2+1 transporders will stay working.

the first two will turn to hd and the last one will stay to sd to cover and oldest tvs/dtt receivers (as the transporders are the feeds of dtt ), until this time will pass (i think since end of 2021?)

 

[georgeflu]

playing for a while, i opened an edision picco s2 firmware (but i do not have such receiver), using "AMIKO_3606-3612_CHANNEL_EDITOR" .
there is an option "encrypted" and choices y/n

so, i think in this kind of receivers, you can download your settings, edit them, add encryption to the channels (as i can see the same happens in the other old ert channels) and reload them to your receiver (and always first take a backup for any reason)

[/url]

 

[dj999]

Have the channels on my solo, all showing fta as on instantly

 

[Gregory90]

give a try here
maybe helped
https://www.sat-universe.com/showpost.php?p=2036974961&postcount=6

->The problem is in fact those channels doesn't have an ENC flag. Boxes like SX88 etc. clears those channels by adding the known BISS key in BISS section.
For other chinese and NO enigma boxes: ===> in BISS section: SID: 0000 + the known key.<<

ERT is NOT Biss Encrypted there is no CaID 2600 (or CaID 2610 Biss2) present, still very similair to Biss and on most devices works the same as Biss, but this is why some receiver/decoders have issues.....

Thank you for the hint, but it doesn´t work at this case.

if I change the SID from 0002 to 0000 and confirm, nothing happens, the change is not accepted.
if i change the CAID from 2600 to 0000 and confirm, the line is deleted

regards

 

[vakula]

I'm sorry to read this. Cleared(whithout enc flag) in that way on dozens cheap no enigma chinese boxes.
Cheers