DreamTwo : OpenATV 6.4 2021.01.23 by Storm (Japhar)

toysoft

Member
Messages
1,828
DreamTwo : OpenATV 6.4 2021.01.23 by Storm (Japhar)
openatv-6.4-dreamtwo-20210123.rootfs.tar.gz

JCuuurH.jpg


MEGA :
Code:
https://mega.nz/file/vz5UQLaS#KgvZKOflUtWZZxPT4uFDCDByM8_uzLtGc1KN1BE8rkI
 

satdan37

Registered
Messages
13
No sound from SPDIF or video

Hello! I've installed it on my DM Two, I've always loved the OpenATV images and this one is also great, except there's absolutelly no sound comming out from the optical SPDIF and video comes out on HDMI only for very few channels, the rest are black. I don't know why that happens, it's happening with all the good images out there: OpenATV, PurE2 (just no sound), OpenBH (just no sound). Does anybody have any idea why that happens and if there is something that, maybe, I can do to fix this (maybe editing something in a configuration file somewhere)?
Thank you for all the hard work!
 

toysoft

Member
Messages
1,828
This is strange, did you tried the OpenPLi for DreamOne/Two ?

We would definitely need to investigate the thing.

Just one tip, try to flash the NewNigma2 official image first for your box, then boot it (doesn't need to setup it). This done, then flash the OpenATV again. And let us know.

TS

Hello! I've installed it on my DM Two, I've always loved the OpenATV images and this one is also great, except there's absolutelly no sound comming out from the optical SPDIF and video comes out on HDMI only for very few channels, the rest are black. I don't know why that happens, it's happening with all the good images out there: OpenATV, PurE2 (just no sound), OpenBH (just no sound). Does anybody have any idea why that happens and if there is something that, maybe, I can do to fix this (maybe editing something in a configuration file somewhere)?
Thank you for all the hard work!
 
Last edited:

satdan37

Registered
Messages
13
Thanks

Thank you for the tip, will try, though I don't understand what could the Newnigma flashing do to change things. One more question: am I supposed to have some kind of chip in my DM Two (it says Japhar chip)? Mine is original, so no extra chips or anything. Thank you very much for your answer!
 

toysoft

Member
Messages
1,828
The old boxes with no more support, got us to team together with few friends to create the Japhar Team. As to build new software fir the old Dreambox HD boxes we had to develop our own sim card, with latest drivers... so Japhar was born.

We then started as a Team to support the original hardware and built these images for the various UHD/4k/H265 boxes... so we now built images for original 4k receivers (no need of japhar chip for these, only for old HD).

The DMM images update the microcode/FP in the original box, so we need you to install a DMM image to be sure it updated the box to latest microcode... then you can install this OpenATV that will work just perfect.

TS
 

satdan37

Registered
Messages
13
But still...

Thank you very much for the expert infos, now I understood a little what's going on inside. I've installed the latest Newnigma and then the OpenATV. It's working now, so I have video and sound on HDMI, but I still don't have sound on the optical SPDIF output, I had to use an HDMI separator to get the sound out for my extra amplifier and speakers. And, in case of a 1-2 seconds decoding problem, the video stops and remains blocked on the last decoded frame, the audio starts again after decoding, but the video remains blocked until I change the channel. I'll continue to strive myself with this image because it's the only one with a working Youtube and in which the oscam works fluently.
I'm waiting for a new improved version or maybe for tips regarding, maybe, a small editing of a configuration somewhere to make the things work better.
 

toysoft

Member
Messages
1,828
Thank you for your feedback.

Yes we seen freezes to happen for unsupported video events 32 and 64. We are working on it to fix these video crashes.

TS
 
Last edited:

satdan37

Registered
Messages
13
Audio

Hello again! And what about the sound output on optical SPDIF? Is this possible or can I say goodbye to that in other than original or Newnigma images?
Thank you very much for the competent answers and for your work!
 

toysoft

Member
Messages
1,828
We are also working on it with PurE2 team, storm for OpenATV/OpenBH and our Team for the OpenPLi.

Can you please check on the other 3 images, PurE2, OpenBH and OpenPLi to see if you have the same issue ? As we dont have such thing (audio installation) to test and your report would be very valuable.

Thanks,

TS
 
Last edited:

satdan37

Registered
Messages
13
Same problem

Hello again! Yes, the problem with the SPDIF output is present on all the images (PurE2, OpenBH, OpenATV). And I'm mad that this is happening on the all the alternatives to the original image (Newnigma is the original with some extra menus, so no real alternative). I hate being forced to use the original image, with no alternative. Of course, it's not your fault and I'm glad there are some Super Mans out there very good with programing who are trying their best to give us alternatives. Respect!
Another problem, that is also present on all original images newer than September 2020 and on the alternatives, is that all the 4k channels on 12705 V 45000 on Thor 0,8W don't work at all (no video, no sound). I don't know how is it possible to sell a 4k receiver and not be able to program an image that's able to use it to its full potential? And worse... being able to do it in June, July, August, September and than instead of improving it, make it worse by destroying what was already working.
I will install again the original image from September 2020, because the video blocking after each decoding glich is getting me down slowly. I'll be observing here every day and install any new version from your alternatives and report back.
Thank you again for existing and trying to give us alternatives! Stay safe and hope to hear from you soon!
 

toysoft

Member
Messages
1,828
Thank you, and be sure we are working to improve our images. Your feedbacks are very valuable, as we don't have all installation and satellites to test.

So your reports are very welcomed, and we are working on this to release impoved versions asap.

TS
 

jetika

Registered
Messages
3
Hi.I have problem with remote control.OpenATV 6.4. Simple not work.....Have pairing bluetooth?
 

george55

Registered
Messages
1
Hi, thanks for your efforts. Nevertheless in DVB-S/S2 and especially in records is audio and video not sync. It persist after image reinstalling. Same problem with OpenPLi 8.0. Thanks in advance for some suggestion of solution.
 
Top