DM800SE Clone Images Sim 2.10 #ssl84

Status
Not open for further replies.

Jasper_

Registered
Messages
232
Sim2-newnigma2_stable_lean_dm800se_v4.0.16-#84d-Jasper-20160106

Sim2-newnigma2_stable_lean_dm800se_v4.0.16-#84d-Jasper-20160106




Clean, no changes.

Sim2

SSL84d

Enigma2: 2015-12-30-tarball
#########################################################################################

Webinterface is working.
Teletext is working.
WLAN is working

#########################################################################################

Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)

#########################################################################################

No WLAN driver included (this is a feature of Newnigma Lean image):

The following drivers are available on the online feed:

Open a Telnet session to install or use Newnigma2 Services/Softwaremanager/Online Installation/show all packages to install:

opkg install kernel-module-carl9170
opkg install kernel-module-rt2800usb
opkg install kernel-module-rt73usb
opkg install kernel-module-r8712u
opkg install kernel-module-zd1211rw
opkg install r8192c

reboot
###########################################################################################

Download:

2016-01-06

https://mega.nz/#!k4gQBbpD!JUa44vbXimTsXUWG-e4I4CTNdybvb0xr3oveiJ3DD5k


Jasper
 

Jasper_

Registered
Messages
232
Merlin-3_OE-2.0-dm800se-20151025-FE-CU-Jasper-20151226

Merlin-3_OE-2.0-dm800se-20151025-FE-CU-Jasper-20151226


changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

CU

added the Clone Update Plugin to upgrade your image online (thx SOA-President)


Sim2

SSL84d

Enigma2: 2015-05-28-tarball

#########################################################################################

Webinterface is working.
Teletext is working.

#########################################################################################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory (25 MB free)
New installed Plugins will be installed on extended Flash on USB

################################################## #########################################
Update your image online:


Menu
Plugins
Start SOA Clone Updater 3.0
"Upgrade-your-Image" and press OK

The image will be updated and restart automatically (after reboot your image is be updated)

################################################## #########################################

Download:

2015-12-26

https://mega.nz/#!41AFTDZT!JinFiaF1g4HIG22U2iyEZOh2x9g5AX5IkeEd-_ODaxo

Merlin Cam Feed:

https://mega.nz/#!R5pGDBTT!oEgHSjVxf8Oe-phRdqIiaqUFho3WeFUyZk6HpDjONFw

Jasper
 

Jasper_

Registered
Messages
232
Sim2-newnigma2_stable_lean_dm800se_v4.0.16-#84d-FE-CU-Jasper-20160107

Sim2-newnigma2_stable_lean_dm800se_v4.0.16-#84d-FE-CU-Jasper-20160107



changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

CU
added the Clone Update Plugin to upgrade your image online
(thx SOA-President)


Sim2

SSL84d

Enigma2: 2015-12-30-tarball
#########################################################################################

Webinterface is working.
Teletext is working.
WLAN is working

#########################################################################################

Deactivate Firmware Update (Newnigma2 Services/System Tools/System Settings)

#########################################################################################
Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box

4. Extend your Flash memory using FlashExpander

Blue Button
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Blue Button
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################
Update your image online:


Blue Button
Start SOA Clone Updater 3.1
"Upgrade-your-Image" and press OK
"Restart-your-Receiver" and press OK

The image will be updated (after reboot your image is be updated to Newnigma 4.0.xx)

###########################################################################################

Download:

2016-01-07

https://mega.nz/#!4ohCFK6Y!omYeONrwjlriSwLC4_ehznl3bDeDOeG4RBrx-3NlYTU



Jasper
 
K

kalll

OoZooN-Image-expand3-eB-sim2-dm800se-20160112

OoZooN-Image-expand3-eB-sim2-dm800se-20160112
# gemini3/g3_wizard #

[URL=http://www.directupload.net] [/URL]

[URL=http://www.directupload.net] [/URL]



#############################
version=1000201512311136
comment=opendreambox
target=9
creator=OoZooN <[email protected]>
url=http://www.OoZooN.tv/
catalog=
boxtype=dm800se
#####################

1. Expand Flash
2. Gemini3.2/g3wizard activate


# Flash Images

# USB Stick (ext3/ext4) mount /media/expand (files on the stick will be deleted)

# Call the Extensions and Expand3-memory with start ok (box boots several times)

# Have fun

--------------------

# Images flashen

# USB Stick (ext3/ext4) einhängen nach /media/expand (Dateien auf dem Stick werden gelöscht)

# Erweiterungen aufrufen und Expand3-Memory mit ok starten (Box bootet mehrmals)

# Viel Spaß


-------------
http://workupload.com/file/jDTpQJHi
---------------------------


thx elblindo
 

Jasper_

Registered
Messages
232
Sim2-dreambox-image-dm800se-20160105-84d-FE-CU-Jasper-20160123

Sim2-dreambox-image-dm800se-20160105-84d-FE-CU-Jasper-20160123



changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

CU
added the Clone Update Plugin (v3.3) to upgrade your image online (thx SOA-President)


Sim2

SSL84d

Enigma2: 2015-12-30-tarball
#########################################################################################

Webinterface is working.
Teletext is working.
WLAN is working

#########################################################################################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box

4. Extend your Flash memory using FlashExpander

Blue Button
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Blue Button
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################
Update your image online:

Please check that you have 9 MB free flash memory before you start the update.

Blue Button
Start SOA Clone Updater 3.1
"Upgrade-your-Image" and press OK
"Restart-your-Receiver" and press OK

The image will be updated
###########################################################################################

Download:

2016-01-23

https://mega.nz/#!ElxmHD5K!gO1ccNSEBMP2UBnJCTJa3qNnv3C30jII4vxsU4RqJpI



Jasper
 

Jasper_

Registered
Messages
232
Sim2-TSimage_3.0_OE-2.0-dm800se-20151231-#84d-Jasper-20160123

Sim2-TSimage_3.0_OE-2.0-dm800se-20151231-#84d-Jasper-20160123


Clean, no changes.

Sim2

SSL84d

Enigma2: 2015-12-30-tarball
################################################## #######################################

Webinterface is working.
Teletext is working.
WLAN is working

################################################## #######################################


Download:

2016-01-23



https://mega.nz/#!gxRFHIAb!ko0GtNLF3FX0t8knMS0vEjgeF5FaAzgRlT1EzbQkSV8



Jasper
 

Jasper_

Registered
Messages
232
Sim2-OoZooN-Image-dm800se-20160117-84d#Jasper-20160123

Sim2-OoZooN-Image-dm800se-20160117-84d#Jasper-20160123


Clean, no changes.

Sim2

SSL84d

Enigma2: 2015-12-30-tarball
################################################## #######################################

Webinterface is working.
Teletext is working.

################################################## #######################################
No WLAN driver included (this is a feature of OoZooN image):

1.Open a Telnet session to install or use Blue/Software Management/Manage Extensions/Network/ to install:

opkg install enigma2-plugin-systemplugins-wirelesslan

2.Open a FTP session and exchange the plugin.py

/usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan

with a patched one


https://mega.nz/#!p0gTGR6Z!e-FgaVBf5Iko8CZDiG9dfr9c5pXYBmoVKrbRv4H7Sxw


reboot

##################################################


Download:

2016-01-23




https://mega.nz/#!R1xR2BBK!DxKL2BEQ4VpVj9wPJIZen-AqqwoxWQamNk20XaNagvU



Jasper
 

Jasper_

Registered
Messages
232
Sim2-OoZooN-Image-dm800se-20160117-FE-#84d-Jasper-20160220

Sim2-OoZooN-Image-dm800se-20160117-FE-#84d-Jasper-20160220


changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

Sim2

SSL84d

Enigma2: 2015-12-30-tarball
################################################## #######################################

Webinterface is working.
Teletext is working.

################################################## #######################################
No WLAN driver included (this is a feature of OoZooN image):

1.Open a Telnet session to install or use Blue/Software Management/Manage Extensions/Network/ to install:

opkg install enigma2-plugin-systemplugins-wirelesslan

2.Open a FTP session and exchange the plugin.py

/usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan

with a patched one


https://mega.nz/#!p0gTGR6Z!e-FgaVBf5Iko8CZDiG9dfr9c5pXYBmoVKrbRv4H7Sxw


reboot

##################################################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Storage device
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Red Button: Initialize
after the USB memory stick is formatted do not mount it

3. Reboot your box (this is important also if you just use an already ext3 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################


Download:

2016-02-20




https://mega.nz/#!VtYWjIQY!QqHgEIOPt1vW9NnzpzxMHYXqfGt4gvrQzXQgLcwB0E8



Jasper
 

bleedheart75

Registered
Messages
16
OpenATV-5.2-dm800se SSL #84d dailybuild by gjstroom

OpenATV-5.2-beta-dm800se #ssl84d

bootlogo.jpg


This image is a 100% build from OpenATV source code.
OpenATV 5.2 uses Gstreamer 1.7.1 which will give better DivX and IPTV stream playback.
You can safely use the online update function, I tricked the driver date 100 years in the future so the present (and working) drivers are not overwritten during update.
It's a 100% clean image !

OE-Core February 2016

Bitbake 1.29.0

GCC 5.3.0

Busybox 1.24.1

Pyhton 2.7.11

OpenSSL 1.0.2f

FFMpeg 2.8.6

Gtreamer 1.7.1

Please note: The image is still under development, so don't expect everything to work.

Online updates are working !

Features:
source: dailybuild
drivers: 20151201 with 20131001 bcm7405
bootloader: ssl84d
size: 58.0 Mb
skin: MyMetrix


GGzfmTi.png


YUuREwe.png


c433nHD.png


9B2VHID.png


Image flashing:
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing

OpenATV-5.2-beta-dm800se #ssl84d dailybuild


Download Link Below

https://mega.nz/#!RpYQ3IzR!-nNLLH9JRW0FHltZuJLuDzLZqolB-PgyYfDupwAbpc4?dl=1

ps. Screenhots are made on a dm800sev2​
 
Last edited:

Jasper_

Registered
Messages
232
Sim2-OpenPLi-4 based images with Gstreamer 1.7.2_2016-02-#84d-Jasper-20160221

Sim2-OpenPLi-4 based images with Gstreamer 1.7.2_2016-02-#84d-Jasper-20160221


Clean, no changes.

Sim2

SSL84d

#########################################################################################
Hi there friends,



Today gstreamer 1.7.2 was released so I did a mass rebuild.



I also tested playback of local files and they're working fine here.

Tested on both on my Dreambox DM800 Se and my GM Spark Triplex (spark7162).



These images were built using the original openpli-oe-core repository that used to be branched as "gst-1".

However since that branch doesn't exist anymore I manually synced it with the "master" branch as of today.

Furthermore there are some additions of my own:



- Ships with gstreamer upstream master git (currently tagged 1.7.2) with the following patches applied:

gstreamer1.0:
file://0001-Fix-crash-with-gst-inspect.patch
file://0001-revert-use-new-gst-adapter-get-buffer.patch

gstreamer1.0-plugins-base:
file://get-caps-from-src-pad-when-query-caps.patch
file://taglist-not-send-to-down-stream-if-all-the-frame-cor.patch
file://0001-riff-media-added-fourcc-to-all-mpeg4-video-caps.patch
file://0001-riff-media-added-fourcc-to-all-ffmpeg-mpeg4-video-ca.patch
file://subparse-avoid-false-negatives-dealing-with-UTF-8.patch

gstreamer1.0-plugins-good:
file://0001-gstrtpmp4gpay-set-dafault-value-for-MPEG4-without-co.patch

gstreamer1.0-plugins-bad:
file://0001-rtmp-fix-seeking-and-potential-segfault.patch
file://fix-maybe-uninitialized-warnings-when-compiling-with-Os.patch

- A nice pre-installed list of public IPTV streams thanks to the Japhar Team.

- Every receiver uses christophecvr's multibox dvbmediasink.

- All receivers with flash larger than 64MB (basically non-Dreambox receivers) ship with gstreamer1.0-libav by default.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from Taapat's tree (which is in sync with master-next).

- Using ffmpeg 2.8.6 from Taapat's tree (which is in sync with master-next), replacing libav.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab from Taapat's tree (which is in sync with master-next).

- Added extra images for: DM800HD, DM7020HDv2, DM800SeV2, DM500HDv2, Atemio Nemesis, Spark7111 and Spark7162 (thanks to Taapat).

- No builds for Wetek.

- jpeg8 replaced by libturbojpeg0_8d+1.4.2 (from master-next).

- libgif upgraded to 5.1.2 (from Taapat's tree), this required a small enigma2 patch.

- Added fusedav and sshfs packages to the feeds.

- Oscam bumped to rev. 11211 with joeuser's patch (stream-relay).

- opencore-amr upgraded to 0.1.3 which is required for gstreamer 1.7 (thanks to Beeker for letting me know).

- Added a special task to compress some binaries right before the do_package_write_ipk with UPX.

This will give us some more free space for those 64MB Dreambox receivers.

- Some more packages backported from master-next and a few other things I forgot about...



Notes:

- If you get corrupted jpeg images on spark/spark7162 the hardware decoder is not working for you, simply login using telnet and type:

rm -f /usr/lib/libmme_host.so

Then restart enigma2 and they should display fine

- Zram is now disabled by default on spark/spark7162, if would like to use it anyways, simply login using telnet and type:

touch /etc/gimme-zram

Then reboot your receiver.

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On some Zgemma Star models (like sh1 for example) you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes.
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK).
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- Some Dreambox receivers only feature 64MB of flash space.

Also gstreamer 1.7 takes up much more space compared to 0.10.

I've tried my best to gain some more free space but you'll have to do it with ~5MB to play with.

I advice you to first do a software upgrade to get the latest gstreamer packages before you install your favorite plugins/cams.





I'd like to thank everyone for testing out my images and giving me feedback for improvements.



Special thanks goes out to ones helping me out understanding various things, in particular the following members for their contributions to OpenPLi and helping me out:

- Taapat (for his contributions and answering the many questions regarding my fulan BSP)

- Christophecvr (for his contribtions and helping me merging sh4 support into his multibox-dvbmediasink)

- mx3L (for his contributions)

- Beeker (for his contributions)

- Athoik (for his contributions)

- betacentauri (for his contributions)

- Japhar Team (for supplying us with web-hosting and IPTV Streams)



And of course the PLi team for keeping their sources and recipes as clean as possible and doing a great job supporting their users!

My apologies if I forgot to mention someone, you know who you are :)



This will be my last public image based on OpenPLi-4.

Now I can start playing with master-next as well and I may publish public PLi-5 testing images in the future, but don't wait for it since my time is limited ;)



Have fun!

MastaG

#########################################################################################

Download:

2016-02-20

https://mega.nz/#!B1pkWKKb!0ix8XtDCGNYTcYu18yLzgP6g4wHFsIpSziEls624DBI



Jasper
 

Jasper_

Registered
Messages
232
Sim2-opendroid-5.3-dm800se-20160223-#84d-Jasper-20160224

Sim2-opendroid-5.3-dm800se-20160223-#84d-Jasper-20160224


Clean, no changes.

Sim2

SSL84d

#########################################################################################
Start development opendroid Beta DM images

Come da titolo opendroid Team da oggi inizia lo sviluppo delle immagini dreambox!
Informiamo che saranno delle Beta! Non Testate!
Abbiamo deciso di iniziare lo sviluppo vista la ripetuta richiesta dell'utenza su questo forum! Ma ci teniamo a precisare che opendroid-team al momento non ha queste macchine per testare le Beta rilasciate, perciò ci affidiamo a voi utenti e ai vostri rispettivi Test, che faranno in modo di far rilasciare un domani delle immagini stabili per questo Marchio!
Saluti Opendroid-Team


As the title opendroid Team today began the development of dreambox images !
Inform you that will be the Beta ! Not Test !
We decided to start the development given the repeated request of users on this forum ! But we would like to clarify that opendroid -team has not shared these machines to test the Beta release , so we rely on you, the users , and to your respective Test , which will work to secure the release tomorrow of stable images for this brand !
Opendroid - Team greetings
###########################################################################################
Download:

2016-02-24

https://mega.nz/#!R1xnlICJ!U2mhvESJ7BgT34Rw3llwNa9Ga4APetv_H5hbG9L4hCc



Jasper
 

zvonko67

Member
Messages
1,733
OpenATV-5.2-dm800se SSL #84d dailybuild by gjstroom

OpenATV-5.2-beta-dm800se #ssl84d

bootlogo.jpg


This image is a 100% build from OpenATV source code.
OpenATV 5.2 uses Gstreamer 1.7.1 which will give better DivX and IPTV stream playback.
You can safely use the online update function, I tricked the driver date 100 years in the future so the present (and working) drivers are not overwritten during update.
It's a 100% clean image !

OE-Core February 2016

Bitbake 1.29.0

GCC 5.3.0

Busybox 1.24.1

Pyhton 2.7.11

OpenSSL 1.0.2f

FFMpeg 2.8.6

Gtreamer 1.7.1

Please note: The image is still under development, so don't expect everything to work.

Online updates are working !

Features:
source: dailybuild
drivers: 20151201 with 20131001 bcm7405
bootloader: ssl84d
size: 58.0 Mb
skin: MyMetrix

GGzfmTi.png


YUuREwe.png


c433nHD.png


9B2VHID.png


Image flashing:
Internet Explorer (recommended)
SUNRAY-FlashUP
Powercycle after flashing

OpenATV-5.2-beta-dm800se #ssl84d dailybuild

[SIZE=+2]<-Download->[/SIZE]

ps. Screenhots are made on a dm800sev2

I try to keep this thread clean and will delete posts if it's not contributing to the content

 

Jasper_

Registered
Messages
232
Sim2-opendroid-5.3-dm800se-20160223-FE-#84d-Jasper-20160305

Sim2-opendroid-5.3-dm800se-20160223-FE-#84d-Jasper-20160305

changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory


Sim2

SSL84d

#########################################################################################
Start development opendroid Beta DM images

Come da titolo opendroid Team da oggi inizia lo sviluppo delle immagini dreambox!
Informiamo che saranno delle Beta! Non Testate!
Abbiamo deciso di iniziare lo sviluppo vista la ripetuta richiesta dell'utenza su questo forum! Ma ci teniamo a precisare che opendroid-team al momento non ha queste macchine per testare le Beta rilasciate, perciò ci affidiamo a voi utenti e ai vostri rispettivi Test, che faranno in modo di far rilasciare un domani delle immagini stabili per questo Marchio!
Saluti Opendroid-Team


As the title opendroid Team today began the development of dreambox images !
Inform you that will be the Beta ! Not Test !
We decided to start the development given the repeated request of users on this forum ! But we would like to clarify that opendroid -team has not shared these machines to test the Beta release , so we rely on you, the users , and to your respective Test , which will work to secure the release tomorrow of stable images for this brand !
Opendroid - Team greetings
###########################################################################################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Harddisk
Initialization
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Initialize

3. Reboot your box (this is important also if you just use an already ext3 or ext4 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################

Download:

2016-03-05

https://mega.nz/#!JlxGxCwI!gU6zxJIgQVpAT9Z5llz0DNCOWAAMeH6vrhVSWz8dKi4



Jasper
 

Jasper_

Registered
Messages
232
Sim2-openatv-5.2-dm800se-20160228-FE-#84d-Jasper-20160228

Sim2-openatv-5.2-dm800se-20160228-FE-#84d-Jasper-20160228


changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory

Sim2

SSL84d

################################################## #######################################
Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick (ext3 or ext4) to your box (be aware the content will be deleted)

2. Reboot your box (this is important also if you just use an already ext3 or ext4 formatted USB memory stick without initialize)

3. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

4. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

5. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################


Download:

2016-02-28




https://mega.nz/#!o8hlGboZ!hntreLoUjQKFt1iCyNTzG2B3gjFhQx6V9HdO7C1LrBM



Jasper
 

Jasper_

Registered
Messages
232
Sim2-OpenPLi-4 based images with Gstreamer 1.7.2_2016-02-FE-#84d-Jasper-20160305

Sim2-OpenPLi-4 based images with Gstreamer 1.7.2_2016-02-FE-#84d-Jasper-20160305


changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory


Sim2

SSL84d

#########################################################################################

Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Harddisk
Red: Initialize
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Initialize

3. Reboot your box (this is important also if you just use an already ext3 or ext4 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

###########################################################################################
Hi there friends,



Today gstreamer 1.7.2 was released so I did a mass rebuild.



I also tested playback of local files and they're working fine here.

Tested on both on my Dreambox DM800 Se and my GM Spark Triplex (spark7162).



These images were built using the original openpli-oe-core repository that used to be branched as "gst-1".

However since that branch doesn't exist anymore I manually synced it with the "master" branch as of today.

Furthermore there are some additions of my own:



- Ships with gstreamer upstream master git (currently tagged 1.7.2) with the following patches applied:

gstreamer1.0:
file://0001-Fix-crash-with-gst-inspect.patch
file://0001-revert-use-new-gst-adapter-get-buffer.patch

gstreamer1.0-plugins-base:
file://get-caps-from-src-pad-when-query-caps.patch
file://taglist-not-send-to-down-stream-if-all-the-frame-cor.patch
file://0001-riff-media-added-fourcc-to-all-mpeg4-video-caps.patch
file://0001-riff-media-added-fourcc-to-all-ffmpeg-mpeg4-video-ca.patch
file://subparse-avoid-false-negatives-dealing-with-UTF-8.patch

gstreamer1.0-plugins-good:
file://0001-gstrtpmp4gpay-set-dafault-value-for-MPEG4-without-co.patch

gstreamer1.0-plugins-bad:
file://0001-rtmp-fix-seeking-and-potential-segfault.patch
file://fix-maybe-uninitialized-warnings-when-compiling-with-Os.patch

- A nice pre-installed list of public IPTV streams thanks to the Japhar Team.

- Every receiver uses christophecvr's multibox dvbmediasink.

- All receivers with flash larger than 64MB (basically non-Dreambox receivers) ship with gstreamer1.0-libav by default.

- Libsoup has been updated to 2.52 (from master-next).
- Using libtrmp and rtmpdump from Taapat's tree (which is in sync with master-next).

- Using ffmpeg 2.8.6 from Taapat's tree (which is in sync with master-next), replacing libav.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support.
- Using aio-grab from Taapat's tree (which is in sync with master-next).

- Added extra images for: DM800HD, DM7020HDv2, DM800SeV2, DM500HDv2, Atemio Nemesis, Spark7111 and Spark7162 (thanks to Taapat).

- No builds for Wetek.

- jpeg8 replaced by libturbojpeg0_8d+1.4.2 (from master-next).

- libgif upgraded to 5.1.2 (from Taapat's tree), this required a small enigma2 patch.

- Added fusedav and sshfs packages to the feeds.

- Oscam bumped to rev. 11211 with joeuser's patch (stream-relay).

- opencore-amr upgraded to 0.1.3 which is required for gstreamer 1.7 (thanks to Beeker for letting me know).

- Added a special task to compress some binaries right before the do_package_write_ipk with UPX.

This will give us some more free space for those 64MB Dreambox receivers.

- Some more packages backported from master-next and a few other things I forgot about...



Notes:

- If you get corrupted jpeg images on spark/spark7162 the hardware decoder is not working for you, simply login using telnet and type:

rm -f /usr/lib/libmme_host.so

Then restart enigma2 and they should display fine

- Zram is now disabled by default on spark/spark7162, if would like to use it anyways, simply login using telnet and type:

touch /etc/gimme-zram

Then reboot your receiver.

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On some Zgemma Star models (like sh1 for example) you cannot use full HD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes.
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK).
Now set the same delay for: "dreambox advanced remote control (native)" as well.

- Some Dreambox receivers only feature 64MB of flash space.

Also gstreamer 1.7 takes up much more space compared to 0.10.

I've tried my best to gain some more free space but you'll have to do it with ~5MB to play with.

I advice you to first do a software upgrade to get the latest gstreamer packages before you install your favorite plugins/cams.





I'd like to thank everyone for testing out my images and giving me feedback for improvements.



Special thanks goes out to ones helping me out understanding various things, in particular the following members for their contributions to OpenPLi and helping me out:

- Taapat (for his contributions and answering the many questions regarding my fulan BSP)

- Christophecvr (for his contribtions and helping me merging sh4 support into his multibox-dvbmediasink)

- mx3L (for his contributions)

- Beeker (for his contributions)

- Athoik (for his contributions)

- betacentauri (for his contributions)

- Japhar Team (for supplying us with web-hosting and IPTV Streams)



And of course the PLi team for keeping their sources and recipes as clean as possible and doing a great job supporting their users!

My apologies if I forgot to mention someone, you know who you are :)



This will be my last public image based on OpenPLi-4.

Now I can start playing with master-next as well and I may publish public PLi-5 testing images in the future, but don't wait for it since my time is limited ;)



Have fun!

MastaG

#########################################################################################

Download:

2016-03-05

https://mega.nz/#!ghZ1RDSL!qTxiwSWRqyF1I6kklr7uO0AU1SEXz8ThCN0wcGLABkA



Jasper
 

Jasper_

Registered
Messages
232
Sim2-Unofficial PLi 4 gstreamer 1.x images 2016-03-DM800SE-#84d-Jasper-20160312

Sim2-Unofficial PLi 4 gstreamer 1.x images 2016-03-DM800SE-#84d-Jasper-20160312


Clean, no changes.

Sim2

SSL84d

#########################################################################################
Hi there friends,



I've created a new batch of unofficial OpenPLi-4 images.

These images are shipping with gstreamer 1.x and some patches which have not been applied to the official images (yet).

See my previous round of images for more general information: http://forums.openpl...images-2016-02/



Changes since last release:

- Replaced the official bootlogo with the World Press Photo of 2015:

"Hope for a New Life" by Warren Richardson.

- Resynced with master and taapat's oe-core.

- Gstreamer snapshot upgraded to 1.7.90, except for spark/spark7162 where I ship version 1.6.3.

Reason for this was the playbin issue which I couldn't solve: http://forums.openpl...ndpost&p=534693

- FFMpeg upgraded to 3.0 (thx to Taapat for the recipes).

gstreamer1.0-libav is now compiled against a reduced version of ffmpeg, leaving more free space.

- Reworked the Dreambox BSP thx to Captain and gjstroom for their work in OE-A.

Hopefully the DM800Se V2, DM7020HD V2 and DM500HD V2 are now working again.

If you have such receiver, please test and report back.

- Added libluray and the blurayplayer plugin by Taapat.

- Moved EMC plugin back to the feeds.

- Added Media-button support in keymap.xml thx to .:MarcinO:.

- Added wifi support for Atemio Nemesis thx to .:MarcinO:.

- Applied patch to servicemp3.cpp from mx3L to fix possible GSOD on switching audio tracks.

- Applied patch to servicemp3.cpp from mx3L for faster IPTV zapping.

- Applied patch to the dvbmediasink from mx3L to fix a possible freeze when seeking mp4 files.

See: http://forums.openpl...ndpost&p=534766

Please test and report back for me.

- Applied the linux 2.6.18 vermagic removal patch.

You should be able to load any kernel module on the DM800 again (use at your own risk).

- Created images for X Solo Mini 3 and Zgemma Star i55.

- Created new libeplayer builds for spark/spark7162 based on ffmpeg 3.0 thx to Taapat.

- Hopefully fixed CrossEPG (untested).

- Applied christophecvr's patch for setting the debug level.

See: http://forums.openpl...ndpost&p=530210

You can find the option in the bottom at Menu -> Settings -> User-interface.

Setting it to "0" will disable eDebug's completely and will give you smoother playback of IPTV streams on slower receivers.



Have fun testing :)

MastaG
#########################################################################################

Download:

2016-03-12

https://mega.nz/#!k4Q0mSjS!VEbYtODpU6-bnndLZnWwPkQ7bZSnGmQzc4camLZYIPc



Jasper
 

Jasper_

Registered
Messages
232
Sim2-Unofficial PLi 4 gstreamer 1.x images 2016-03-DM800SE-FE-#84d-Jasper-20160312

Sim2-Unofficial PLi 4 gstreamer 1.x images 2016-03-DM800SE-FE-#84d-Jasper-20160312


changes:

FE
added a modified FlashExpander which is deleting directories in /usr to get more free Flash memory


Sim2

SSL84d

#########################################################################################
Extend your Flash memory to an USB memory stick:

1. add an empty USB memory stick to your box (be aware the content will be deleted)
2. prepare your USB memory stick for FlashExpander

Menu
Setup
System
Harddisk
Red: Initialize
choose your USB memory stick which you want to use for FlashExpander (be aware the content will be deleted)
Initialize

3. Reboot your box (this is important also if you just use an already ext3 or ext4 formatted USB memory stick without initialize)

4. Extend your Flash memory using FlashExpander

Menu
Plugins
Start Flashexpander
choose your USB memory device and start the copy process (this takes a few minutes)
a message will appear to restart the box

5. check if FlashExpander is working

Menu
Plugins
Start Flashexpander

6. now you should have plenty of free Flash memory
New installed Plugins will be installed on extended Flash on USB

#########################################################################################

Hi there friends,



I've created a new batch of unofficial OpenPLi-4 images.

These images are shipping with gstreamer 1.x and some patches which have not been applied to the official images (yet).

See my previous round of images for more general information: http://forums.openpl...images-2016-02/



Changes since last release:

- Replaced the official bootlogo with the World Press Photo of 2015:

"Hope for a New Life" by Warren Richardson.

- Resynced with master and taapat's oe-core.

- Gstreamer snapshot upgraded to 1.7.90, except for spark/spark7162 where I ship version 1.6.3.

Reason for this was the playbin issue which I couldn't solve: http://forums.openpl...ndpost&p=534693

- FFMpeg upgraded to 3.0 (thx to Taapat for the recipes).

gstreamer1.0-libav is now compiled against a reduced version of ffmpeg, leaving more free space.

- Reworked the Dreambox BSP thx to Captain and gjstroom for their work in OE-A.

Hopefully the DM800Se V2, DM7020HD V2 and DM500HD V2 are now working again.

If you have such receiver, please test and report back.

- Added libluray and the blurayplayer plugin by Taapat.

- Moved EMC plugin back to the feeds.

- Added Media-button support in keymap.xml thx to .:MarcinO:.

- Added wifi support for Atemio Nemesis thx to .:MarcinO:.

- Applied patch to servicemp3.cpp from mx3L to fix possible GSOD on switching audio tracks.

- Applied patch to servicemp3.cpp from mx3L for faster IPTV zapping.

- Applied patch to the dvbmediasink from mx3L to fix a possible freeze when seeking mp4 files.

See: http://forums.openpl...ndpost&p=534766

Please test and report back for me.

- Applied the linux 2.6.18 vermagic removal patch.

You should be able to load any kernel module on the DM800 again (use at your own risk).

- Created images for X Solo Mini 3 and Zgemma Star i55.

- Created new libeplayer builds for spark/spark7162 based on ffmpeg 3.0 thx to Taapat.

- Hopefully fixed CrossEPG (untested).

- Applied christophecvr's patch for setting the debug level.

See: http://forums.openpl...ndpost&p=530210

You can find the option in the bottom at Menu -> Settings -> User-interface.

Setting it to "0" will disable eDebug's completely and will give you smoother playback of IPTV streams on slower receivers.



Have fun testing :)

MastaG
#########################################################################################

Download:

2016-03-19

https://mega.nz/#!g9xzHaDS!VvvXqygN9Yldv1pnwFnqzbD-arIeCV-Qb-MHeBNLGBc



Jasper
 
Status
Not open for further replies.
Top