Discussion about Mbox

sonic67

Registered
Messages
208
09.09.2008 second update
========================

-Fix problem with CA_SET_PID error message
 
Last edited:

licornee

Registered
Messages
34
hi
I met a lot of trouble to parameter C:line
in the example I can read :
//C: { 192.168.1.102 10005 local1 local1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 0100006a:0100006B;} { 1420:A200:B302:}

but the answer is "Lost connection with Newcs Server !!! Please reconnect." in MCC :mecry:

no trouble with another item
 

k2k2000

Registered
Messages
727
licornee

tray
Code:
C: { 192.168.1.102 10005 local1 local1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 }

if server from local use ip 127.0.0.1

mgcamd can also connect to newcs newcamd server.
edit your newcamd.list,and add

Code:
CWS = 192.168.1.102 10005 local1 local1 10 02 13 04 15 06 17 08 01 10 11 12 13 14
 

licornee

Registered
Messages
34
Thanks a lot for your reply
I know mgcamd with newcs, but i tested mbox on a kathrein and i have these results
Code:
 ReReading pmt.tmp
[22:21:44] ==================================================================
[22:21:44]  ECM: CA ID: 0x0500 Viaccess       (00008300)         -> CA PID: 0x1971
[22:21:44]  ECM: CA ID: 0x0503 Viaccess       (00000B00)         -> CA PID: 0x1970
[22:21:44]  ECM: CA ID: 0x0502 Viaccess       (00002610)         -> CA PID: 0x1972
[22:21:44]  ECM: CA ID: 0x0503 Viaccess       (00002820)         -> CA PID: 0x196F
[22:21:44]  ECM: CA ID: 0x0100 Seca/Mediaguard (3317)    -> CA PID: 0x158C
[22:21:44]  ECM: CA ID: 0x0100 Seca/Mediaguard (3315)    -> CA PID: 0x1588
[22:21:44]  ECM: CA ID: 0x0100 Seca/Mediaguard (3311)    -> CA PID: 0x158B
[22:21:44]  ECM: CA ID: 0x0100 Seca/Mediaguard (A821)    -> CA PID: 0x158A
black screen with mbox ( ok with mgcamd)

Another channel and it's ok with this channel
==================================================================
[22:12:07] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x158A
[22:12:07] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x1587
[22:12:07] ECM: CA ID: 0x0100 Seca/Mediaguard (A825) -> CA PID: 0x1588
[22:12:07] ECM: CA ID: 0x0100 Seca/Mediaguard (0081) -> CA PID: 0x05E7
[newcamd] Sending ECM to (192.168.x.y:port).
[22:12:23] [newcamd] Control words received successfully (192.168.x.y:port).
[22:12:23] <-CW FOR ME :), from (192.168.x.y:port) (<-1) (607 ms)
[22:12:23] ===== Seca/Mediaguard ECM on CaID 0x0100, pid 0x05E7 ====
[22:12:23] prov: 0000
[22:12:23] CW0: 26 CB 02 F3 45 93 49 21
[22:12:23] CW1: 80 F9 EB 64 12 23 65 9A==================================================================


The two channels are ok with mgcamd.
2 questions :
- why Mbox find sometime the provider 0081, and on another channnel, mbox do not find the provider ?
May be, Mbox stopped after 4 CA ID ?
- Why I read prov: 0000 and not 0081 ?

Thanks for your help
 
Last edited:

k2k2000

Registered
Messages
727
licornee

i have the same problem with art irdeto2 nilesat.
not all channel can be opened.

add this line to your mbox.cfg raw ecm

Code:
W: { 1 }
 

mower

VIP
Messages
3
@licornee
Hello,

Pls record PMT table and upload it here so I can look why for some channels I cant find 0081 provider.

[22:12:23] ===== Seca/Mediaguard ECM on CaID 0x0100, pid 0x05E7 ====
[22:12:23] prov: 0000

This "prov" isnt for writing info about system provid, it's your ID from M line if you have M line.I dont know how mgcamd or gboxx put infos from local decoding.

For now mbox is compatible with gboxx because i use main gbox protocol but in future it will not be. And, I dont code new gboxx clone so pls dont compare how gboxx do it or why mbox doing this way ...

Thanks all for testing.
 

licornee

Registered
Messages
34
@licornee
Hello,

Pls record PMT table and upload it here so I can look why for some channels I cant find 0081 provider.

[22:12:23] ===== Seca/Mediaguard ECM on CaID 0x0100, pid 0x05E7 ====
[22:12:23] prov: 0000

This "prov" isnt for writing info about system provid, it's your ID from M line if you have M line.I dont know how mgcamd or gboxx put infos from local decoding.

For now mbox is compatible with gboxx because i use main gbox protocol but in future it will not be. And, I dont code new gboxx clone so pls dont compare how gboxx do it or why mbox doing this way ...

Thanks all for testing.

trial on Sept 18

[20:09:59] Starting MBOX version 0.3 BETA coded by The_Ripper (17.09.2008)
.....

[20:22:18] ReReading pmt.tmp
[20:22:18] ==================================================================
[20:22:18] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x1A72
[20:22:18] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x1A74
[20:22:18] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x1A76
[20:22:18] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x1A73
[20:22:18] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x168D
[20:22:18] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x168B
[20:22:18] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x168A
[20:22:18] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x168C
[20:22:18] ==================================================================

black same as usual

new problem

[20:23:11] ReReading pmt.tmp
[20:23:11] ==================================================================
[20:23:11] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x19F0
[20:23:11] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x19F1
[20:23:11] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x19F2
[20:23:11] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x160A
[20:23:11] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x1609
[20:23:11] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x1608
[20:23:11] *ECM: CA ID: 0x0100 Seca/Mediaguard (0081) -> CA PID: 0x0669 Provider ok but black screen with this version
[20:23:11] ==================================================================
[20:23:11] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:12] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:13] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:14] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:15] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:16] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:17] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
[20:23:18] PTI: IOCTL ERROR SET SLOT PID , err = 000D0047
New problem
CTRL BREAK

[20:23:26] ReReading pmt.tmp
[20:23:26] ==================================================================
[20:23:26] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x1971
[20:23:26] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x1970
[20:23:26] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x1972
[20:23:26] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x196F
[20:23:26] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x158C
[20:23:26] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x1588
[20:23:26] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x158B
[20:23:26] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x158A
[20:23:26] ==================================================================
[20:23:44] Exiting ECM thread ...
[20:23:44] Exiting timer thread ...
[20:23:44] Exiting newcamd worker thread ...
[20:23:45] Exiting newcamd worker thread ...
[20:23:47] Exiting mbox 0.3 BETA version ...


the pmt.tmp http://rapidshare.com/files/146414059/pmt.tmp.html

:(

I tested
  • G: { 01003317 }
    G: { 01003315 }
    G: { 01003311 }
    G: { 0100A821 }
without result
 

licornee

Registered
Messages
34
another trial with previous version

...[20:37:14] Starting MBOX version 0.3 BETA coded by The_Ripper (16.09.2008)
....
[20:37:52] ReReading pmt.tmp
[20:37:52] ==================================================================
[20:37:52] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x1A72
[20:37:52] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x1A74
[20:37:52] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x1A76
[20:37:52] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x1A73
[20:37:52] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x168D
[20:37:52] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x168B
[20:37:52] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x168A
[20:37:52] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x168C
[20:37:52] ==================================================================
[20:38:04]new channel
[20:38:04] ReReading pmt.tmp
[20:38:04] ==================================================================
[20:38:04] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x1971
[20:38:04] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x1970
[20:38:04] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x1972
[20:38:04] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x196F
[20:38:04] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x158C
[20:38:04] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x1588
[20:38:04] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x158B
[20:38:04] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x158A
[20:38:04] ==================================================================
[20:38:14]new channel
[20:38:14] ReReading pmt.tmp
[20:38:14] ==================================================================
[20:38:14] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x1970
[20:38:14] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x1972
[20:38:14] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x1973
[20:38:14] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x1971
[20:38:14] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x1589
[20:38:14] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x1588
[20:38:14] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x1586
[20:38:14] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x1587
[20:38:14] ==================================================================
ñ[20:38:40] Exiting mbox 0.3 BETA version ...

You can see that the PID move, BUT not the CAID 3317, 3315, 3311, A821 .....

For me the good prov are
  • [20:42:00] [newcamd] Card: CaID 0x0100 ProvID: 0x000080 (192.168.x.yyy:12345)
    [20:42:00] [newcamd] Card: CaID 0x0100 ProvID: 0x000081 (192.168.x.yyy:12345)
    [20:42:00] [newcamd] Card: CaID 0x0100 ProvID: 0x000084 (192.168.x.yyy:12345)
 

licornee

Registered
Messages
34
I tested with the version on 11.09


With mgcamd --> newcs

===== Seca ECM on CaID 0x0100, pid 0x0637 ======
prov: 000081
cw0: 5C 56 91 .............
cw1: 37 90 1D ..............
Signature OK
.....:thum:

I stopped mgcamd; --> mbox

[20:50:50] STAPI INIT ... OK :)
[20:50:50] ExYuSAT Team
[20:50:50] Starting MBOX version 0.2 BETA coded by The_Ripper (11.09.2008)
[20:50:50] This program is for educational & informational purposes only!!
[20:50:50] ===> Net Mode <===
[20:50:50] Reading cwshare.cfg ...
[20:50:50] Trying to get online,please wait ...
[20:50:50] Total 1 newcamd server(s) to connect
[20:50:50] Creating ecm parser thread ...OK
[20:50:50] Creating timer thread ...OK
[20:50:50] Creating newcamd worker thread ...OK
[20:50:50]
[20:50:50] ReReading pmt.tmp
[20:50:50] ==================================================================
[20:50:50] ECM: CA ID: 0x0503 Viaccess (00000B00) -> CA PID: 0x19C0
[20:50:50] ECM: CA ID: 0x0502 Viaccess (00002610) -> CA PID: 0x19BF
[20:50:50] ECM: CA ID: 0x0500 Viaccess (00008300) -> CA PID: 0x19C2
[20:50:50] ECM: CA ID: 0x0503 Viaccess (00002820) -> CA PID: 0x19C1
[20:50:50] ECM: CA ID: 0x0100 Seca/Mediaguard (3317) -> CA PID: 0x15D9
[20:50:50] ECM: CA ID: 0x0100 Seca/Mediaguard (3315) -> CA PID: 0x15D7
[20:50:50] ECM: CA ID: 0x0100 Seca/Mediaguard (3311) -> CA PID: 0x15D6
[20:50:50] ECM: CA ID: 0x0100 Seca/Mediaguard (A821) -> CA PID: 0x15D8
[20:50:50] ==================================================================
[20:50:50] [newcamd] Trying to connect to newcamd server (192.168.x.yyy:12345)
[20:50:50] [newcamd] Connected to (192.168.x.yyy:12345) ...
[20:50:50] [newcamd] Got card with CaID 0x0100 and 3 number(s) of ProvID (192.168.x.yyy:12345)
[20:50:50] [newcamd] Card: CaID 0x0100 ProvID: 0x000080 (192.168.x.yyy:12345)
[20:50:50] [newcamd] Card: CaID 0x0100 ProvID: 0x000081 (192.168.x.yyy:12345)
[20:50:50] [newcamd] Card: CaID 0x0100 ProvID: 0x000084 (192.168.x.yyy:12345)
[20:50:50] [newcamd] Creating newcamd worker thread for (192.168.x.yyy:12345) ...


I moved to another channel

[20:52:23] No slot for pid:0x00D0
[20:52:23] No slot for pid:0x03B4
[20:52:23] No slot for pid:0x00CD
[20:52:23] No slot for pid:0x00E3
[20:52:23] No slot for pid:0x04E5
[20:52:23] No slot for pid:0x0232
[20:52:23] No slot for pid:0x04E7
[20:52:23] [newcamd] Sending ECM to (192.168.x.yyy:12345).
[20:52:23] [newcamd] Control words received successfully (192.168.x.yyy:12345).
[20:52:23] <-CW FOR ME :), from (192.168.x.yyy:12345) (<-1) (597 ms)
[20:52:23] ===== Seca/Mediaguard ECM on CaID 0x0100, pid 0x0669 ====
[20:52:23] prov: 0000
[20:52:23] CW0: 91 A1 1E ..............
[20:52:23] CW1: 8E CA 29 ...................
[20:52:23] =================================================
[20:52:24] [newcamd] Sending ECM to (192.168.x.yyy:12345).
[20:52:25] [newcamd] Control words received successfully (192.168.x.yyy:12345).
[20:52:25] <-CW FOR ME :), from (192.168.x.yyy:12345) (<-1) (615 ms)
[20:52:25] ===== Seca/Mediaguard ECM on CaID 0x0100, pid 0x0669 ====
[20:52:25] prov: 0000
[20:52:25] CW0: 91 A1 1E ..............
[20:52:25] CW1: 48 D2 52 .............
[20:52:25] =================================================
:thum:

So with this version, that's better for Seca/Mediaguard ECM on CaID 0x0100 on Astra 19°
 

licornee

Registered
Messages
34
Mbox 0.4 ( 29.09.2008 )



-Added local card(s) CWs reshare.
-Added binary for OpenWRT devices(not tested).
-Added Q option in mbox.cfg for newcamd connect retry in sec.
-Fix parsing many SECA providers in PMT table.
-Optimize code for memory usage.

NOTICE: YOU MUST SET xxxx.list file for your local card or it will not work !!!!!!!!!!!!!!!!!!!!!!!!!
 

mazizeh

Registered
Messages
36
hi,
1- i don't have any local cards, what shall I enter in xxx.list and what shall i rename it?

2- version 0006 worked for me but 0008 didn't work !!!

thanks
 

Rocknroll

Staff member
Administrator
Messages
6,174
hi,
1- i don't have any local cards, what shall I enter in xxx.list and what shall i rename it?

2- version 0006 worked for me but 0008 didn't work !!!

thanks

You shouldn't worry about port.list file if you don't have C: line in your cwshare.cfg.
0008 working fine in ipbox9000.
 

fikos67

Registered
Messages
125
Hi , has anyone tested mbox if it works with gamma card , in newcs with mgcam it works fine but with mbox-newcs i haven't manage to make it work :mad:
Any help will be great .
 

mazizeh

Registered
Messages
36
Problems here !!!

I'm using relook 200S with MBox 0.4 Build 0011 (latest), following are the results:

1- NileSat Channels decrypted very slow.
2- Hotbird and Badr channels are faster.
3- ALL channels freezes a lot.
4- I'v changed the L option from 1 to 0, channels decryption is faster but the freezing is still there.

Thanks fo all
 

encounter

Registered
Messages
3
Thanks a lot,
ive tested the new 0012 with Newcs on Dream500 with Gemini 4.5.
It works fine so far, but Im not sure, if Ive done all fine.
On telnet with ps I have 4x Newcs and 8x mbox Processes, this ist right?

I use a startscipt and im not sure if it is all well.
Working for both Tools is OK, Ecms are transported from my local, virtual Cards there.

Maybe someone can check on a Gemini 4.5 for Processes? thx a lot for the nice Work
 
Top