Discussion about Gamma Card

[Brummie]

does anyone have current fille?
Thk,,,

you can try this one http://www.sat-universe.com/showpost.php?p=343341&postcount=51 its been a long time ago since I done mine

 

[kegnkiwi]

Is gamma still working on 39e for anyone? I'v have mine programmed for ages but for some reason it just seems to have recently stopped. I know there is very little left but still the same would still like to get whats left.

 

[kegnkiwi]

Confirmed working needed to send a dreambox keyfile and all other bits and pieces to get it to work.

 

[ooOO_SORGOS_OOoo]

Gamma card bulsat com not working

regards

 

[Brummie]

there is still some channels working on bulsat with gamma

 

[kegnkiwi]

yes brummie i have those working now. I have a screen shot but i am not allowed to up load it.

Thanks

 

[ooOO_SORGOS_OOoo]

there is still some channels working on bulsat with gamma

this file working again??

Gammacard_Bulsat_20080808.zip (3.9 KB, 135 views)

 

[Brummie]

its never gone off but not all the channels are available now but Diema & Nova Sport are still good for the footie

 

[kegnkiwi]

In my case I did not have all the settings correct and I did have it working up until a month ago. The file I loaded was not from here tonight as I had the original on my computer but I think its the same one.

 

[ooOO_SORGOS_OOoo]

thank you for interesting for support

regards

 

[Brummie]

make sure you have these settings in your cccam.cfg that config is for both slots in a DM800se

SMARTCARD CLOCK FREQUENCY: /dev/sci0 6000000
CAMKEY : /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci0
SMARTCARD CLOCK FREQUENCY: /dev/sci1 6000000
CAMKEY : /dev/sci1 00 00 00 00 00 00 00 00
CAMDATA : /dev/sci1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/sci1

 

[cyclades]

there is still some channels working on bulsat with gamma

Nova , NovaSport , KinoNova , Diema , Diema family , NG , AXN , FoxLife , FoxCrime , Planeta tv , TCM / Cartoon Net

tested and Working fine (file 20080808) :thum:

 

[ooOO_SORGOS_OOoo]

Gamma card problem !

Hello dear friends my gamma card not working

i am using gamma card gamma loader 1.1. it is say me cleaned

but i am use gamma loader 2.2 it says me not cleaned

This is not a Gammacard. The Card ATR is 3B9F210E47414D4D4143415244205620312E349D

how can repair this card?

i want to program 20080808 bulsat packet?

regards

 

[ooOO_SORGOS_OOoo]

Hi dear friends

i am programmed my gamma card now i will try then i will write here

regards

 

[TonyO]

Use a legit irdeto receiver to update it, multicams struggle sometimes.

I had what I thought were 3 dead cards, when I reserected my humax 5400 I got them all working again.

All the 2008 files work ok for bulsat, albeit only for about 8 channels, with EPL footy, so far ok.

If you have probs that carry on use a softcam, the keys have now and next and last for weeks.

 

[ooOO_SORGOS_OOoo]

it doesnt open bulsatcom

 

[Brummie]

what version of cccam are you using with it try 2.1.3

 

[kegnkiwi]

gamma card is still working bulsat on what is left of id2, i used cas studio and the tab within there software to program my gamma, not need to use anything else. cccam 2.2.1 clears it and so does 2.3.0. I'm watching nova sport now using doscam.

 

[Brummie]

anyone managed to get a gamma card working in either slot on a VU + Solo2

 

[darklordsbane]

gamma card is still working bulsat on what is left of id2, i used cas studio and the tab within there software to program my gamma, not need to use anything else. cccam 2.2.1 clears it and so does 2.3.0. I'm watching nova sport now using doscam.

Not sure what you mean cccam clears it is that on all recievers and if so how do you do it by not use cas studio
any help greatly appreciated