cuberevo 250HD and Diseqc setting

[morri]

hi there
im used to dreambox and just got a cuberevo 250hd
i have a probolem in setting my 8/1 Diseqc on cuberevo
back to dreambox used to set AA, AB ,,etc
but here i tried all possibilities to get it fixed but couldnt

if any one can help with the correct setting for the next LNBS pls do

Nilesat 7W on LNB 1
Eutelsat7E on LNB 2
Hotbird 13E on LNB 3
Badr 26E on LNB 5
Astra 28E on LNB 6
Asra 4.8E on LNB 7
Astra 19E on LNB 8

Thanks for any help and thoughts
Regards
Edit/Delete Message

PS i reposted this here coz i guess i did post in the wrong 9000 forum

 

[mbd]

Nilesat 7W on LNB 1 = 1-a
Eutelsat7E on LNB 2 = 1-b
Hotbird 13E on LNB 3 = 1-c
Badr 26E on LNB 5 = 1-d
Astra 28E on LNB 6 = 2-a
Asra 4.8E on LNB 7 = 2-b
Astra 19E on LNB 8 = 2-c

 

[morri]

Nilesat 7W on LNB 1 = 1-a
Eutelsat7E on LNB 2 = 1-b
Hotbird 13E on LNB 3 = 1-c
Badr 26E on LNB 5 = 1-d
Astra 28E on LNB 6 = 2-a
Asra 4.8E on LNB 7 = 2-b
Astra 19E on LNB 8 = 2-c

Thanks and much appreciated for ur kind reply

just for the good sake order and to be sure
these settings under fixed antenna menu and,

1-refers to uncommited switch and A,B,C to Diseqc parameters ...

pls note for LNB 5 , its located in the fifth socket ( ie LNB 4 is missing and not fitted , so would it still have the same values and not 1-A as per your settings ?


thanks again for your help

 

[mbd]

these settings under fixed antenna menu and,

1-refers to uncommited switch and A,B,C to Diseqc parameters

change [5]

Nilesat 7W on LNB 1 = 1-a
Eutelsat7E on LNB 2 = 1-b
Hotbird 13E on LNB 3 = 1-c
Badr 26E on LNB 5 = 2-a
Astra 28E on LNB 6 = 2-b
Asra 4.8E on LNB 7 = 2-c
Astra 19E on LNB 8 = 2-d

 

[morri]

hi again my friend

i tried and followed the exact mentioned settings, but unfortunately only Nilesat 7w LNB 1 works , the rest didnt

when i tried to set hotbird upon the previous settings that u mentioned, i had a signal of 73 % , by scanning the said Lnb3 (hotbird) i got Nilesat7w channels !


any clue where the problem is ?

Thanks for your kind help

Regards

 

[mbd]

can u write the exact setup of the lnb's in u'r Diseqc.

[in 1-8]

 

[morri]

Hi Again

Nilesat 7W on LNB 1 = 1-a
Antenna type: fixed
sattelite name: Nilesat 7.0W
Tuner : 1
LNB : universal
local frequency : 9750/10600
Tp Freq: 10719/v
LNB power : on
Tonebust: None
Diseqc parameters: A
uncommitted switch : 1
Diseqc repeats : None
Swap commands : no
sequence repeats : no


Eutelsat7E on LNB 2 = 1-b
Hotbird 13E on LNB 3 = 1-c
sattelite name: HOtbird 6.7A,8(13.0E)
Tuner : 1
LNB : universal
local frequency : 9750/10600
Tp Freq: 10719/v
LNB power : on
Tonebust: None
Diseqc parameters: c
uncommitted switch : 1
Diseqc repeats : None
Swap commands : no
sequence repeats : no

Badr 26E on LNB 5 = 1-d
Astra 28E on LNB 6 = 2-a
Asra 4.8E on LNB 7 = 2-b
Astra 19E on LNB 8 = 2-c

i checked these settings with hotbird ,the only sat with accepted signal, all the rest when i made same settings , i had no signal at all

as i mentioned with the above settings for hotbird , and 73% signal , with autosearch , i had all Nilesat channels instead of hotbirds ones...

just if any help the image is DGS latest one...

hope this info of any help to you dear...

thanks again for ur time and help

Regards

 

[mbd]

try 2 scan 1 sat at a time [default scan]don't use auto'

btw.if u have more boxes turn them off [just 4 the scan]