You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
CHAT about CCCam on Humax 5400
- Thread starter beastien
- Start date
Salah Said
HUMAX fan
- Messages
- 163
same problem here. i can see that one server has 246 cards but nothon dowloading from him.
anyone can help? thanx.
What program are you using?
what are Humax configurations you use?
difference between Humax5400 and Humax5400z and Humax5400zPlus
Technical and fundamental differences between the Humax 5400 and 5400 and Z 5400 Z Plus
Should be identified on some things
1 - Understand the technical differences between the models of various organs Humax 5400.
2 - identify some hardware problems Humax 5400 and resolution of self.
3 - Understand the origins and evolution of these devices and the possibility to differentiate them easily.
And now we begin Commentary
First: Humax 5400 regular (or old) - devoid of any letters or marks
This device is the first version of the handset models Humax 5400 and known as the "Humax 5400 or the old normal," characterized by this type of Humax 5400 no need to ship it to lift protection for Zboard Basel for the first time, so it accepts all the HoT team patches without any amendment to the Boot Loader own, and notes that when downloading any particular patch of HoT team for the first time becomes a copy of the program are as follows:
+ HIC 1.05.00
(HIC = Humax Irdeto Common Interface)
This is because all the team patches that HoT based version of the software.
This type of devices Humax "Humax 5400 normal" comes in four types of hardware and four types of the System ID and also four types of the Boot Loader, and thus can be called a "Humax quartet", as illustrated by the following picture:
Here we have to learn a very important point specifically for the Boot Loader and the System ID, namely:
The Boot Loader is the lifeblood and pulse district Humax, Humax can not live without it so we can kill the Humax if we change the Boot Loader to another inappropriate
Should also note that the Boot Loader H2.11 with version that was released specifically for the Humax 5100 and that the Boot Loader H2.19 with version that was released specifically for the Humax 5400 Z Plus and both bots (H2.11 and H2.19) you can upgrade them the bot H2.08
I must also note that there is no issue with a Boot Loader L2.19.
For System ID for Vtgierh harmless condition that is compatible with the Boot Loader own, because the lack of compatibility with the Boot Loader its own may lead to some problems, including loss of signal:
Second: Humax 5400
This type represents the second generation of devices Humax 5400, which produced the company and it called Humax 5400 Z, has done to protect him through a solid material (glued) to the area known as JP250 images show the following:
The Humax 5400 Z before the break for a copy protection program for Software, a different "ZIC" and Blodr quite different from what is known today, as images show the following:
Protection, decrypt it is shipped for the first time PAL Boot Loader H2.08 device with a version known as the Zboard, which we will address it in some detail later.
After extracting protection for Humax 5400 Z becomes just like Humax 5400 in the ordinary acceptance of all the patches group HoT, but of course there are some minor differences in Alhard ware with the Humax 5400 the average size of the RAM and Flash Memory.
This type of Humax "Humax 5400 Z" has one type of Alhardoer with one type of the System ID and also has one type of the Boot Loader, also shows the following picture:
Can Humax 5400 Z to accept any of the Boot Loader the following:
H2.08 and H2.11 and H2.19
Go back to the topic Removing the protection and purpose as we have is to accept patches Group of HoT only the so-called "Humax 5400 patched", The original Alsovetotrut Viqublha Humax 5400 Z, without resorting to lift his protection.
If disengagement of protection for Humax 5400 Z means "to change the Boot Loader original (which is 3.1.43) to the Boot Loader version with H2.08.
The steps in Removing the protection Venl_khasha in the following points:
First: You must have to have the following tools:
A tool called Pal Zboard and the other called Pal Molex also show the following images:
Second: that we have a file HIC 10306 + CAMz along the HDF (existing annexes), and also to be found to have to download Lauder ÇáÈÇÊÔ WDN4OAK +.
Third: We unzip the outer cover of the device, then unplug it.
IV: We installed the Zboard the tool after you install the Molex Molex Pal JP250 as the following pictures:
Fifth: We are open Lauder download the file and call the HIC 10306 + CAMz.
VI: We are clicking on the icon download the file referred to in the fifth and then directly to the pressure on the key tool of the Zboard and to maintain pressure, and then press a key Alpaoralkhalafy of the receiver.
VII: Once the progress of the download, we lift our hands for a key tool of the Zboard after about four seconds from the operation of Power receiver.
Eighth: wait until the download is complete, and the appearance of the word "END" on the screen the front of the receiver.
IX: We are the separation of electric power to the receiver by pressing the button switch electric power-rear.
Tenth: We remove the Zboard from your receiver.
We have thus completed the process of dismantling protection for the receiver.
Third: Humax 5400 Z plus:
This type represents the third generation of Humax 5400 Humax Corporation, which has produced and called "Humax 5400 Z Plus" which is exactly like Humax 5400 Z in terms of protection, with that comes a solid material is also protected in the region named JP250, which obliges us to Removing the curse of protection by the Zboard to accept all the patches issued by the Group of HoT.
Protection, decrypt it is shipped for the first time PAL version is Boot Loader H2.08 via the Zboard, and then are promoted to the Boot Loader Boot Loader is the version H2.19, and this can Humax 5400 Z Plus to work on any of the Boot Loader follows:
H2.08 and H2.11
Comes the Humax 5400 Z Plus before removing the copy protection program for the Software, a different "ZIC" and Blodr quite different from what is known today, as images show the following:
This type of Humax "Humax 5400 Z Plus" has one type of Alhardoer with one type of the System ID and also has one type of the Boot Loader, also shows the following picture:
But the main difference between him and the Humax 5400 and 5400 the average Z in the type of tuner, it comes Humax 5400 Z Plus Btyonr type D1278-LVA3 This is what makes him different from the Patch Humax 5400 and 5400 the average Z of the different type of tuner, but this difference is not never in the characteristics ÇáÈÇÊÔ but the difference lies in the profile of a special tuner is only called Tuner Fix, but this team has the HoT work tool called 5400Z + Builder version 2.8, the latest tool or 5400Z + ID Changer, and the recent version 1.2 to convert them to the patches of patches accepted Humax 5400 Z Plus.
Other types: Humax 5410 Z and 5410 Z plus: --
There are some devices that emerged later, after the Humax 5400 Althelat different kinds and in the same form and software, a Humax 5410 Humax 5410 Z, Z Plus (which is directed at countries Australia), but the difference between them is that the Humax 5410 Z and 5410 Z Plus cam built by the only kind Ardetto and were not equipped with slots for cam other.
The main difference between the Humax 5410 Z and 5410 Z Plus lies in that the first number by 2 SCART outputs and the second by the exits, there is no SCART also show the following images:
These types of devices like them just like the Humax 5400 Z and 5400 Z Plus in terms of protection, where protection can break them through Pal shipped with Boot Loader Version H2.08 via the Zboard and then accept any patch issued by the Group of HoT and become fully, as does any type of types of Humax 5400, as mentioned above, the purpose of ending the protection devices is to accept patches to the group HoT and thus its ability to unlock encrypted channels available broken.
In the end, I hope that I have been able to explain and add new information
Technical and fundamental differences between the Humax 5400 and 5400 and Z 5400 Z Plus
Should be identified on some things
1 - Understand the technical differences between the models of various organs Humax 5400.
2 - identify some hardware problems Humax 5400 and resolution of self.
3 - Understand the origins and evolution of these devices and the possibility to differentiate them easily.
And now we begin Commentary
First: Humax 5400 regular (or old) - devoid of any letters or marks
This device is the first version of the handset models Humax 5400 and known as the "Humax 5400 or the old normal," characterized by this type of Humax 5400 no need to ship it to lift protection for Zboard Basel for the first time, so it accepts all the HoT team patches without any amendment to the Boot Loader own, and notes that when downloading any particular patch of HoT team for the first time becomes a copy of the program are as follows:
+ HIC 1.05.00
(HIC = Humax Irdeto Common Interface)
This is because all the team patches that HoT based version of the software.
This type of devices Humax "Humax 5400 normal" comes in four types of hardware and four types of the System ID and also four types of the Boot Loader, and thus can be called a "Humax quartet", as illustrated by the following picture:
Here we have to learn a very important point specifically for the Boot Loader and the System ID, namely:
The Boot Loader is the lifeblood and pulse district Humax, Humax can not live without it so we can kill the Humax if we change the Boot Loader to another inappropriate
Should also note that the Boot Loader H2.11 with version that was released specifically for the Humax 5100 and that the Boot Loader H2.19 with version that was released specifically for the Humax 5400 Z Plus and both bots (H2.11 and H2.19) you can upgrade them the bot H2.08
I must also note that there is no issue with a Boot Loader L2.19.
For System ID for Vtgierh harmless condition that is compatible with the Boot Loader own, because the lack of compatibility with the Boot Loader its own may lead to some problems, including loss of signal:
Second: Humax 5400
This type represents the second generation of devices Humax 5400, which produced the company and it called Humax 5400 Z, has done to protect him through a solid material (glued) to the area known as JP250 images show the following:
The Humax 5400 Z before the break for a copy protection program for Software, a different "ZIC" and Blodr quite different from what is known today, as images show the following:
Protection, decrypt it is shipped for the first time PAL Boot Loader H2.08 device with a version known as the Zboard, which we will address it in some detail later.
After extracting protection for Humax 5400 Z becomes just like Humax 5400 in the ordinary acceptance of all the patches group HoT, but of course there are some minor differences in Alhard ware with the Humax 5400 the average size of the RAM and Flash Memory.
This type of Humax "Humax 5400 Z" has one type of Alhardoer with one type of the System ID and also has one type of the Boot Loader, also shows the following picture:
Can Humax 5400 Z to accept any of the Boot Loader the following:
H2.08 and H2.11 and H2.19
Go back to the topic Removing the protection and purpose as we have is to accept patches Group of HoT only the so-called "Humax 5400 patched", The original Alsovetotrut Viqublha Humax 5400 Z, without resorting to lift his protection.
If disengagement of protection for Humax 5400 Z means "to change the Boot Loader original (which is 3.1.43) to the Boot Loader version with H2.08.
The steps in Removing the protection Venl_khasha in the following points:
First: You must have to have the following tools:
A tool called Pal Zboard and the other called Pal Molex also show the following images:
Second: that we have a file HIC 10306 + CAMz along the HDF (existing annexes), and also to be found to have to download Lauder ÇáÈÇÊÔ WDN4OAK +.
Third: We unzip the outer cover of the device, then unplug it.
IV: We installed the Zboard the tool after you install the Molex Molex Pal JP250 as the following pictures:
Fifth: We are open Lauder download the file and call the HIC 10306 + CAMz.
VI: We are clicking on the icon download the file referred to in the fifth and then directly to the pressure on the key tool of the Zboard and to maintain pressure, and then press a key Alpaoralkhalafy of the receiver.
VII: Once the progress of the download, we lift our hands for a key tool of the Zboard after about four seconds from the operation of Power receiver.
Eighth: wait until the download is complete, and the appearance of the word "END" on the screen the front of the receiver.
IX: We are the separation of electric power to the receiver by pressing the button switch electric power-rear.
Tenth: We remove the Zboard from your receiver.
We have thus completed the process of dismantling protection for the receiver.
Third: Humax 5400 Z plus:
This type represents the third generation of Humax 5400 Humax Corporation, which has produced and called "Humax 5400 Z Plus" which is exactly like Humax 5400 Z in terms of protection, with that comes a solid material is also protected in the region named JP250, which obliges us to Removing the curse of protection by the Zboard to accept all the patches issued by the Group of HoT.
Protection, decrypt it is shipped for the first time PAL version is Boot Loader H2.08 via the Zboard, and then are promoted to the Boot Loader Boot Loader is the version H2.19, and this can Humax 5400 Z Plus to work on any of the Boot Loader follows:
H2.08 and H2.11
Comes the Humax 5400 Z Plus before removing the copy protection program for the Software, a different "ZIC" and Blodr quite different from what is known today, as images show the following:
This type of Humax "Humax 5400 Z Plus" has one type of Alhardoer with one type of the System ID and also has one type of the Boot Loader, also shows the following picture:
But the main difference between him and the Humax 5400 and 5400 the average Z in the type of tuner, it comes Humax 5400 Z Plus Btyonr type D1278-LVA3 This is what makes him different from the Patch Humax 5400 and 5400 the average Z of the different type of tuner, but this difference is not never in the characteristics ÇáÈÇÊÔ but the difference lies in the profile of a special tuner is only called Tuner Fix, but this team has the HoT work tool called 5400Z + Builder version 2.8, the latest tool or 5400Z + ID Changer, and the recent version 1.2 to convert them to the patches of patches accepted Humax 5400 Z Plus.
Other types: Humax 5410 Z and 5410 Z plus: --
There are some devices that emerged later, after the Humax 5400 Althelat different kinds and in the same form and software, a Humax 5410 Humax 5410 Z, Z Plus (which is directed at countries Australia), but the difference between them is that the Humax 5410 Z and 5410 Z Plus cam built by the only kind Ardetto and were not equipped with slots for cam other.
The main difference between the Humax 5410 Z and 5410 Z Plus lies in that the first number by 2 SCART outputs and the second by the exits, there is no SCART also show the following images:
These types of devices like them just like the Humax 5400 Z and 5400 Z Plus in terms of protection, where protection can break them through Pal shipped with Boot Loader Version H2.08 via the Zboard and then accept any patch issued by the Group of HoT and become fully, as does any type of types of Humax 5400, as mentioned above, the purpose of ending the protection devices is to accept patches to the group HoT and thus its ability to unlock encrypted channels available broken.
In the end, I hope that I have been able to explain and add new information
Dear friends,
I need your help.I bought an used HUMAX 5400Z receiver,I don't have any problem for EMU and in the same time I like to use it by CCCam for CS.
Firstly I downloaded "SSSP PLUG" file to PC,then I wrote server info in "cfg" file as that:
C: ServerDNS Port User Password yes { 0.0.3 }
RS232 connection between PC and receiver is OK. Also PC-Internet connection is OK.Then I started SSSP PLUG program,when I came an encrypted channel on receiver,I can read all correct info on "FLYCCCAM v0.2 Trial Table except "KEY" line. On KEY line is written "no cccam" so I couldn't watch any encrypted channel.
On receiver menu:
Menu --> ToH --> Confi : "CARD+S+EMU" "ECM+EMM" "SSSP"
I don't know where I made mistake.If you can help me I'll be happy.
Thanks in advance for answers.Best regards.
I need your help.I bought an used HUMAX 5400Z receiver,I don't have any problem for EMU and in the same time I like to use it by CCCam for CS.
Firstly I downloaded "SSSP PLUG" file to PC,then I wrote server info in "cfg" file as that:
C: ServerDNS Port User Password yes { 0.0.3 }
RS232 connection between PC and receiver is OK. Also PC-Internet connection is OK.Then I started SSSP PLUG program,when I came an encrypted channel on receiver,I can read all correct info on "FLYCCCAM v0.2 Trial Table except "KEY" line. On KEY line is written "no cccam" so I couldn't watch any encrypted channel.
On receiver menu:
Menu --> ToH --> Confi : "CARD+S+EMU" "ECM+EMM" "SSSP"
I don't know where I made mistake.If you can help me I'll be happy.
Thanks in advance for answers.Best regards.
Dear friends,
I need your help.I bought an used HUMAX 5400Z receiver,I don't have any problem for EMU and in the same time I like to use it by CCCam for CS.
Firstly I downloaded "SSSP PLUG" file to PC,then I wrote server info in "cfg" file as that:
C: ServerDNS Port User Password yes { 0.0.3 }
RS232 connection between PC and receiver is OK. Also PC-Internet connection is OK.Then I started SSSP PLUG program,when I came an encrypted channel on receiver,I can read all correct info on "FLYCCCAM v0.2 Trial Table except "KEY" line. On KEY line is written "no cccam" so I couldn't watch any encrypted channel.
On receiver menu:
Menu --> ToH --> Confi : "CARD+S+EMU" "ECM+EMM" "SSSP"
I don't know where I made mistake.If you can help me I'll be happy.
Thanks in advance for answers.Best regards.
Is there any idea about my problem? It's also actual at that moment.
Best regards.
miss_lolla
Registered
- Messages
- 14
I WANT TO KNOW WATH IS THE BEST PROGRAMME OF CCCAM;I HAVE MANY PROG BUT THEY DONT WORK
humax5410 just like humax5400 but without common interfaceThanks for the information on Humax 5410z
only one card reader
check server status , you need working server detailsIs there any idea about my problem? It's also actual at that moment.
Best regards.
free server wont work for long time
billiadis13
Registered
- Messages
- 2
thank youIt is simple
Null Modem between Humax and PC
the program is on PC
PC is connected to the internet
Run the program
adjust Humax settings
The program should have the server in one of its files
And that is all
braveheartleo81
Registered
- Messages
- 8
hi all m facing problems wid jsc world cup and still showing me on tv 0500 audio is not available and scrambled...
i have done following steps
a. update firmware to toh34_hot11b
b. update table to bilge_PMCTable_HoTxx.x_Fix...09.06.2010
c. set the freq to 11.958, H, 27500, 3/4 (7'W)
d. runnign de software sharemax Humax 5400...[ShareMax5.5 and Plugins]...Upd.1...13.06.2010
e. i have irdeto jsc package card inserted expired, showing card accepted.
after doing all still m not getting channels?
i have done following steps
a. update firmware to toh34_hot11b
b. update table to bilge_PMCTable_HoTxx.x_Fix...09.06.2010
c. set the freq to 11.958, H, 27500, 3/4 (7'W)
d. runnign de software sharemax Humax 5400...[ShareMax5.5 and Plugins]...Upd.1...13.06.2010
e. i have irdeto jsc package card inserted expired, showing card accepted.
after doing all still m not getting channels?
braveheartleo81
Registered
- Messages
- 8
hey power, wid dis version i was succesfully able to view js* sports +8 and +10 tht too everytime i need to change/select the caid from PARSER....why jsc w***ld cu* is not able to open? when i try showing me error code: 0500 audio is not available or scrambled on the channel?
braveheartleo81
Registered
- Messages
- 8
use Humax 5400...[ShareBox and Plugins]...Upd.1...14.06.2010 and update the server.cfg file wid latest card server details, i m sure u will get the channels but keep your eye on latest updates of cardserver as mogembo said free server wont work for long time its true....