Can't open or edit channels list - Unic
- Thread starter seekman
- Start date
JAKITAKI
Super VIP
- Messages
- 9,214
JAKITAKI
Super VIP
- Messages
- 9,214
This is not a list of channels, mistakenly recorded
download it correctly from the receiver
I tried several times. I also removed all the channels and transponders and made a completely new blind scan for all satellites, and re-saved the channels list. Always the same error.
Maybe the receiver is "not able" to save correctly such big channels lists?
Any hints on how to correctly save it?
Maybe the receiver is "not able" to save correctly such big channels lists?
Any hints on how to correctly save it?
I did as you said, with only one difference. In the English settings, the right menu is called "Expansion" not "Extension".
I followed the above steps (which are exactly the same I did previously) and saved the channels list once again.
It saved a new file to USB with the same content and exactly the same size.
What's wrong?
I followed the above steps (which are exactly the same I did previously) and saved the channels list once again.
It saved a new file to USB with the same content and exactly the same size.
What's wrong?
Ok, before doing it I selected "save ALL to USB" (I don't know what it is but hopefully it saved the current status so that I can revert to it later). And it saved me a .BIN file to the USB.
Then,
I loaded this list to the receiver and it changed me not only the channels (it starts with RAI 1, 2, etc) - it changed the language of the receiver to Italian, the color settings, etc.
I then uploaded once again the list of channels to USB and this time the upload to USB was much slower.
The save is a little smaller SDX file. Different.
The uploads I did before were 30635 KB and this one is 30343KB.
Here is the link to the new upload to usb.
Is there something wrong with my receiver?
Then,
I loaded this list to the receiver and it changed me not only the channels (it starts with RAI 1, 2, etc) - it changed the language of the receiver to Italian, the color settings, etc.
I then uploaded once again the list of channels to USB and this time the upload to USB was much slower.
The save is a little smaller SDX file. Different.
The uploads I did before were 30635 KB and this one is 30343KB.
Here is the link to the new upload to usb.
Is there something wrong with my receiver?
I tried to revert it loading the BIN file I generated with "Save all to USB". But after loading it, nothing changed.
So I tried to load the .SDX file I saved today morning (30635 KB) - the same file that the channels editors can't open. And this one reloaded all the channels as I had before.
However it did not set up the colors, language.
It looks like that "Save channels to USB" in my decoder save channels, but not settings.
The .SDX that you sent me for test, saves both channels and decoder settings.
Really strange situation
So I tried to load the .SDX file I saved today morning (30635 KB) - the same file that the channels editors can't open. And this one reloaded all the channels as I had before.
However it did not set up the colors, language.
It looks like that "Save channels to USB" in my decoder save channels, but not settings.
The .SDX that you sent me for test, saves both channels and decoder settings.
Really strange situation
JAKITAKI
Super VIP
- Messages
- 9,214
what you have loaded the software in the receiver?
It is probably the fault of software
In CryptoBox, clone Qviart, it was the same problem with the channel lists
change software
http://www.sat-universe.com/showthread.php?t=290153
It is probably the fault of software
In CryptoBox, clone Qviart, it was the same problem with the channel lists
change software
http://www.sat-universe.com/showthread.php?t=290153
I had Prometheus 1.16 downloaded from dvb-upload.
Before doing what you said I took a photo of the receiver info:
Then I downloaded Prometheus 1.16 from the site you gave and installed it.
Then I wanted to take a new photo of the receiver info, but I did not do it, because it has the same identical info.
Then I went to Savel All channels to USB... and... it saved me a .bin file instead than .sdx :mecry:
What's wrong now?
Before doing what you said I took a photo of the receiver info:
Then I downloaded Prometheus 1.16 from the site you gave and installed it.
Then I wanted to take a new photo of the receiver info, but I did not do it, because it has the same identical info.
Then I went to Savel All channels to USB... and... it saved me a .bin file instead than .sdx :mecry:
What's wrong now?
Today I noticed there is a new firmware available. I downloaded the 1.8 from here: http://www.sat-universe.com/showthread.php?t=290153
And installed it in the receiver.
Still the same problem. The .sdx channel file is "strange" and the channel editors don't recognize it
Can anybody help?
And installed it in the receiver.
Still the same problem. The .sdx channel file is "strange" and the channel editors don't recognize it
Can anybody help?
I found a workaround in a French forum!!
I go to USB, and instead of choosing the folder and then press the yellow button, etc, etc...
when I am in the USB mode and I see the USB content, I just click the SAT button on the remote control and then I press 1113... and voila.
I saves the channels list in the right format.
The question is.... WHY?
I go to USB, and instead of choosing the folder and then press the yellow button, etc, etc...
when I am in the USB mode and I see the USB content, I just click the SAT button on the remote control and then I press 1113... and voila.
I saves the channels list in the right format.
The question is.... WHY?