Hello to all,
this is a strange issue.... and weird to explain.. so lets start.
I have one AZ Europe Ultra HD(Clone), with CCCam 2.21 with the dish orientated to HISPASAT....
If i define a startup channel, that channel and all the others IN THE SAME TRANSPONDER open, but if i choose a diferente channel from diferente transponder.... it says SID not found in pat....
Weird!!!
Im using OpenSpa with the last 3.3.1 drivers... and just to be sure that the problema dont came from the LNB or so.... i have tested with other equipment "DM500HD" Works great...
I´ve tried all kernel, SPAZE, OPENRTI, several versions... and the results are the same....
any sugestions...
this is a strange issue.... and weird to explain.. so lets start.
I have one AZ Europe Ultra HD(Clone), with CCCam 2.21 with the dish orientated to HISPASAT....
If i define a startup channel, that channel and all the others IN THE SAME TRANSPONDER open, but if i choose a diferente channel from diferente transponder.... it says SID not found in pat....
Weird!!!
Im using OpenSpa with the last 3.3.1 drivers... and just to be sure that the problema dont came from the LNB or so.... i have tested with other equipment "DM500HD" Works great...
I´ve tried all kernel, SPAZE, OPENRTI, several versions... and the results are the same....
any sugestions...