Azbox HD Patch
- Thread starter elgeneral
- Start date
- Status
first pacht Azbox HD
Code:
[B]Release Notes - version 0.9.1086[/B]
1. Becareful! All channels will be removed after updating
A. Channel structure is changed
2. New OpenXCAS API is available
A. SmartCard Interface is added (reference HXOpenXCAS_Sample)
B. Managed by GUI(Install/Uninstall, Enable/Disable, Set priority)
- for changing server address, edit /EMU/OpenXCAS/addon.conf
CAMD_MY_SERVER for Cam1.tgz
CAMD_SERVER_1 for Cam2.tgz
CAMD_SERVER_2 for Cam3.tgz
CAMD_SERVER_3 for Cam4.tgz
- for example,
If you set CAMD_MY_SERVER as "http://azupd.com", Samples will be installed when you select CAMD_MY_SERVER from GUI
If you set CAMD_SERVER_1 as "http://azupd.com", MultiCas will be installed when you select CAMD_SERVER_1 from GUI
If you set CAMD_SERVER_2 as "http://azupd.com", gCam will be installed when you select CAMD_SERVER_2 from GUI
C. Debug message on/off
D. Time debug message is added
E. Improved PMT, ECM return time
3. Fix bug about AC3 audio
A. Please check ac3 audio output after 1 or 2 hours
B. ProLogic is not supported yet
4. Movie Player
A. Fix bug about SRT subtitle(disapper after 1 hours)
B. Test results of some contents
a. File name; Matrix.Reloaded.Trailer-640x346-XviD-1.0beta2-HE_AAC_subtitled.mkv
- Video is somtimes broken( Popcorn has same problem)
b. File name; Matrix.Reloaded.Trailer-RV9-Karl640x432_HE_AAC_subtitled_chapters.mkv
- Not supported(Poscorn has same problem)
c. File name; big_buck_bunny_1080p_h264.mov
- Good
d. File name; big_buck_bunny_1080p_stereo.avi
- Not supported(Popcorn can decode audio only)
e. File name; big_buck_bunny_1080p_surround.avi
- Video is sometimes broken(Popcorn doesn't have any problem. I am debugging on it)
f. File name: big_buck_bunny_1080p_stereo.ogg
- Not supported(Poscorn has same problem)
5. Recording CAS Channel(if EMU can support 2 stream)
6. Timer is added
7. You can use a drop down list for changing video resolution
8. DEL/BACK and CAPS/NUM to history navigation at TV Mode
Code:
http://rapidshare.com/files/184128112/TD210_Patch_0.9.1086.rar.htmlEmu plugin
Plugin in /emu kopieren und per Telnet nach Neustart starten.
Plugin in /emu kopieren und per Telnet nach Neustart starten.
Code:
Ich habe da was für den Install des EMU gefunden.
1 - extract the files.rar
2 - Put them in /EMU through ftp
3 - Set 755 for :
A - emu_module ( it's in Multicas )
B - openxcas.conf ( it's in openxcas )
C - sample_module ( it's in Samples )
D - addons.conf ( it's in EMU )
Now reboot, your cardreader is working now if all rights are set correct, just select menu ( not home! ) then on the bootom cas module and then cas settings and select encryption.
Now for Incubus:
Add incubusCamd.sigma, incubusCamd.conf and incubusCamd.prio to:
/EMU/openxcas
set 755 for all 3 files
Edit openxcas.conf so it show this :
Quote:
[modules]
count = 1
active_auto = false
active_1 = incubusCamd
[module_1]
name = incubusCamd
path = EMU/openxcas
daemon = incubusCamd.sigma
version = 1.00
Then add serverline (twice) to incubusCamd.conf
Reboot box then log in with telnet and do the following commands:
cd /EMU/openxcas (enter)
./incubusCamd.sigma (enter)
For start-up on reboot I did the following
( WARNING!! DO AT YOUR OWN RISK!!!!!!)
S.sh contains the start-up commands so we need to add the command there, but............... it's read-only so we need to make it RW:
1 - Login with telnet.
2 - give command:
Quote:
mount -o remount,rw -t ext3 /dev/hda1 /MMP
3 - Now you can edit with you're favourite editor the S.sh file, add the follwing on the bottom of the file
Quote:
sleep 10
cd /EMU/openxcas
./incubusCamd.sigma
Now reboot and Incubus will start @boot.
Thanks klick
0.9.1173 Release Notes
Fixed
- Not receiving all ecm's
Added
- Possibility to downlaod several cam's from ONE server
Fixed
- Timeshift, its ok on FTA but on scrambled, emulator stops receive ECM when press pause, it can rewind and play,
but all after pause pressed is broken. API stop to send ecm data
Fixed
- On 30/11 in put the box in standby. On the 1st of December to data in the display as 31/11.
This was corrected when I powered the box in TV mode.
Fixed
- When using rewind/ff with time shift enabled -> emu stop to receive ECM data,
same happen when use pause button, emu stop to receive ecm data! Time shift not usable.
Fixed
- Playback of recorded files shouldn't need starts emu decoding
Improved
- When box stays in standby, time on VFD (and propably system time) going slower than must be, so clock getting later and later.
Improved
- When recording HD channels is frequently that record stops
Fixed
- After some times of viewing "ORF1 HD" there are freezers of some seconds (no picture).
Fixed
- On AC3 channels there are sound freezers every 10-12 seconds.
Improved
- On Sw 0.9.1029 SD and HD channels are not working fine, you can see that picture is not moving correct, some frames are missing
Fixed
- Factory reset, just should erase chanels, clear settings and recordings,
but don't touch on HDD contents like movies that i put, songs and so on
Improved
- Scanning with NIT making duplicate channels (and duplicate TP in list), seems if freq in list not exactly the same as in NIT.
Fixed
- In default TP list most TP from 36E have Left/Right swapped (Left = Horizontal, not Vertical!)"
Fixed
- If try to add manually TP's to one satellite withut any TP, like AMAZONAS for example,
the receiver will never scan or detect signal on this TP's / Satellite
Fixed
- On firmware version1120 - 36E sat have no transponders in list, and manual TP scan just crash CRTVCore
Improved
- Signal meter takes too long to update (10 seconds) or more. At this way signal meter is useless
Improved
- MKV sometimes not possible show subtitles if movie have more than one subtitle
Fixed
- The subtitles disappear after minute 60
Fixed
- On last software 0.9.1120 Subtitles on lest language don0twork very fine,
sometimes appear some strange Characters, but on previous version that was not happen.
Fixed
- When we start Browser and change on Movies and try Play movie we see in background last page from Browser.
0.9.1173
Last edited by a moderator:
Release Notes 0.9.1238
Fixed
- Digi Tv and Total TV Subtitles
Fixed
- Scanning with NIT making duplicate channels (and duplicate TP in list), seems if freq in list not exactly the same as in NIT.
Fixed
- Missing or broekn words on subtitiles of MKV
Added
- Possibility to change CAM's URL server.
- Possibility that camd.tar can be called camd*.*.tar.
- Possibility to install plugins and camd from FTP.
- Possibility to install plugins from internet (like camd*.*.tar)
Added
- Channel multi-selection for editing on the channel manager
Added
- Allow user to adust sbutitles delay -10'00"00(10 minutes) to +10'00"00(10 minutes)
If user press the left or right button, the 0.5 second change one by one.
If user press the up or down button, the 20 seconds change one by one.
Added
- Support Diseq1.1 uncommitted.
Added
- libcrypto.so.0.9.7
Changed
- Removed other EIT filtering
Fixed
- Digi Tv and Total TV Subtitles
Fixed
- Scanning with NIT making duplicate channels (and duplicate TP in list), seems if freq in list not exactly the same as in NIT.
Fixed
- Missing or broekn words on subtitiles of MKV
Added
- Possibility to change CAM's URL server.
- Possibility that camd.tar can be called camd*.*.tar.
- Possibility to install plugins and camd from FTP.
- Possibility to install plugins from internet (like camd*.*.tar)
Added
- Channel multi-selection for editing on the channel manager
Added
- Allow user to adust sbutitles delay -10'00"00(10 minutes) to +10'00"00(10 minutes)
If user press the left or right button, the 0.5 second change one by one.
If user press the up or down button, the 20 seconds change one by one.
Added
- Support Diseq1.1 uncommitted.
Added
- libcrypto.so.0.9.7
Changed
- Removed other EIT filtering
new patch
http://azupd.com/0.9.1314/patch.bin
Release Notes
Fixed
- Broken characters on EPG
Fixed
- Turn off the tuner when BOX goes to sleep mode
Improved
- Speed up file copying using SMB
Improved
- ECM & PMT return time
Fixed
- Screen Control (auto) doesnˇŻt work Correct, sometimes doesn't change picture aspect ratio,
we must cancel and go again to setup AUTO for change.
Fixed
- When we change option Repeat to standard and go out from MENU audio and them back to AUDIO.
Azbox donˇŻt have save last changes (we have to repeat again the selection)
Fixed
- libcrypto.so.0.9.7 0bytes
Added
- Add option to Edit channel, and manually change Genre, Provider and Country attributes.
Added
- At Language/Time menu, add option Show Time/Date,
Options (AM/PM YYYY/MM/DD or 24.00 DD/MM/YYYY). European or American format.
Added
- Add dyndns client
Changed
- smart card driver is changed
http://azupd.com/0.9.1314/patch.bin
Release Notes
Fixed
- Broken characters on EPG
Fixed
- Turn off the tuner when BOX goes to sleep mode
Improved
- Speed up file copying using SMB
Improved
- ECM & PMT return time
Fixed
- Screen Control (auto) doesnˇŻt work Correct, sometimes doesn't change picture aspect ratio,
we must cancel and go again to setup AUTO for change.
Fixed
- When we change option Repeat to standard and go out from MENU audio and them back to AUDIO.
Azbox donˇŻt have save last changes (we have to repeat again the selection)
Fixed
- libcrypto.so.0.9.7 0bytes
Added
- Add option to Edit channel, and manually change Genre, Provider and Country attributes.
Added
- At Language/Time menu, add option Show Time/Date,
Options (AM/PM YYYY/MM/DD or 24.00 DD/MM/YYYY). European or American format.
Added
- Add dyndns client
Changed
- smart card driver is changed
Release Notes 0.9.1387
Fixed
- miss russian simbols on EPG
Fixed
- ITV HD channel is not detected on channel scanning
Fixed
- Box is crashed during playing MKV on Movie Player
Fixed
- Box crash when are doing optimization of pictures / photos
Fixed
- mismatch channel name with PID info on FAV list
Added
- Multi ECM per Channel
Please refer the API document & sample codes
Added
- GOGO list (Channel downloading)
Changed
- Smart card driver is changed
Fixed
- miss russian simbols on EPG
Fixed
- ITV HD channel is not detected on channel scanning
Fixed
- Box is crashed during playing MKV on Movie Player
Fixed
- Box crash when are doing optimization of pictures / photos
Fixed
- mismatch channel name with PID info on FAV list
Added
- Multi ECM per Channel
Please refer the API document & sample codes
Added
- GOGO list (Channel downloading)
Changed
- Smart card driver is changed
0.9.1473
Release Notes
Fixed
- Problem with the loop output: when receiver is at standby mode, holding power suppl. on Antenna input connector On ,
then, receiver linked to the loop cannot manage to LNB.
Whoever if you turn off the electricity AZBox - receiver linked to the loop works ok
Fixed
- After a formating of a 1TB HDD, it created just a partition of 500GB.
Fixed
- Broken Characters at EPG, specially Polish EPG
Fixed
- No info about recording in VFD Display(LED)
Fixed
- Pause option is not working when using emu
Fixed
- Emulator stops receive ECM when press pause, it can rewind and play, but all after pause pressed is broken.
API stop to send ecm data
Fixed
- No After setting control word
Fixed
- broken TS packet on symbolrate 30000 FEC 7/8 in hellas sat2
Fixed
- OGG Vorbis don't supported at MKV files
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Improved
- slow EPG at info during zapping
Added
- "argument" and "xcasapi" field in openxcas config file for newcs & mgcamd
module will be excuted with arguments
module with "xcasapi = FALSE" will be consider just daemon
Added
- OSD capture tool. Use 'admin_control' for capturing OSD screen shot
USAGE: admin_control /DATA/pitures/capture01.png
Not supported on browser, TTX, subttile, video
DOWNLOAD
Release Notes
Fixed
- Problem with the loop output: when receiver is at standby mode, holding power suppl. on Antenna input connector On ,
then, receiver linked to the loop cannot manage to LNB.
Whoever if you turn off the electricity AZBox - receiver linked to the loop works ok
Fixed
- After a formating of a 1TB HDD, it created just a partition of 500GB.
Fixed
- Broken Characters at EPG, specially Polish EPG
Fixed
- No info about recording in VFD Display(LED)
Fixed
- Pause option is not working when using emu
Fixed
- Emulator stops receive ECM when press pause, it can rewind and play, but all after pause pressed is broken.
API stop to send ecm data
Fixed
- No After setting control word
Fixed
- broken TS packet on symbolrate 30000 FEC 7/8 in hellas sat2
Fixed
- OGG Vorbis don't supported at MKV files
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Improved
- slow EPG at info during zapping
Added
- "argument" and "xcasapi" field in openxcas config file for newcs & mgcamd
module will be excuted with arguments
module with "xcasapi = FALSE" will be consider just daemon
Added
- OSD capture tool. Use 'admin_control' for capturing OSD screen shot
USAGE: admin_control /DATA/pitures/capture01.png
Not supported on browser, TTX, subttile, video
DOWNLOAD
New Firm 0.9.1600
Fixed
- WMA Pro don't work at all over SPDIF and HDMI
Fixed
- At channel info bar (Zapping bar) appear Actual and next program and not only actual like actually
FIxed
- Signal meter takes too long to update (10 seconds) or more. At this way signal meter is useless
Fixed
- Timeshift / Pause and record don't work at USB, using FAT32 or EXT3
Fixed
- Timeshift at HD channels don't work very fine, receiver looks like a crazy horse
Fixed
- Improve API, to don't stop EMUlators, API sometimes get's losted Stressed.
Fixed
- MKV, if MKV have 2 tracks DTS and AC3, at AC3 cannot be played
Fixed
- OGG Vorbis don't supported at MKV files
Added
- Possibility of change color of subtitles
Added
- Increase the maximum size of subtitles, at HD contents the maximum size allowed by azbox, still small
Added
- Possibility to change positions of subtitles, goal is be possible put subtitles at black line, when movie broadcasted at 16:9
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Fixed
- Pic-viewer: scaler/ optimizer very slow, aspect ratio incorrect
Fixed
- Chinese charset instead of latin lower case letter, while using rename feature, create albuns, etc.
Added
- FTP CLIENT
Fixed
- FilmBox HD image freeze
Download
Fixed
- WMA Pro don't work at all over SPDIF and HDMI
Fixed
- At channel info bar (Zapping bar) appear Actual and next program and not only actual like actually
FIxed
- Signal meter takes too long to update (10 seconds) or more. At this way signal meter is useless
Fixed
- Timeshift / Pause and record don't work at USB, using FAT32 or EXT3
Fixed
- Timeshift at HD channels don't work very fine, receiver looks like a crazy horse
Fixed
- Improve API, to don't stop EMUlators, API sometimes get's losted Stressed.
Fixed
- MKV, if MKV have 2 tracks DTS and AC3, at AC3 cannot be played
Fixed
- OGG Vorbis don't supported at MKV files
Added
- Possibility of change color of subtitles
Added
- Increase the maximum size of subtitles, at HD contents the maximum size allowed by azbox, still small
Added
- Possibility to change positions of subtitles, goal is be possible put subtitles at black line, when movie broadcasted at 16:9
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Fixed
- Pic-viewer: scaler/ optimizer very slow, aspect ratio incorrect
Fixed
- Chinese charset instead of latin lower case letter, while using rename feature, create albuns, etc.
Added
- FTP CLIENT
Fixed
- FilmBox HD image freeze
Download
Last edited:
- Messages
- 17,767
AZBox HD New Firmware 0.9.1605
New Firmware 0.9.1605 Azbox HD
Release Notes
Be carefull! Channel list will be removed after updating
Fixed
- Wrong information of DVB-S2 frequency
Fixed
- Disappear & hang up on FTP menu
Fixed
- WMA Pro don't work at all over SPDIF and HDMI
Fixed
- At channel info bar (Zapping bar) appear Actual and next program and not only actual like actually
FIxed
- Signal meter takes too long to update (10 seconds) or more. At this way signal meter is useless
Fixed
- Timeshift / Pause and record don't work at USB, using FAT32 or EXT3
Fixed
- Timeshift at HD channels don't work very fine, receiver looks like a crazy horse
Fixed
- Improve API, to don't stop EMUlators, API sometimes get's losted Stressed.
Fixed
- MKV, if MKV have 2 tracks DTS and AC3, at AC3 cannot be played
Fixed
- OGG Vorbis don't supported at MKV files
Added
- Possibility of change color of subtitles
Added
- Increase the maximum size of subtitles, at HD contents the maximum size allowed by azbox, still small
Added
- Possibility to change positions of subtitles, goal is be possible put subtitles at black line, when movie broadcasted at 16:9
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Fixed
- Pic-viewer: scaler/ optimizer very slow, aspect ratio incorrect
Fixed
- Chinese charset instead of latin lower case letter, while using rename feature, create albuns, etc.
Added
- FTP CLIENT
Fixed
- FilmBox HD image freeze
New Firmware 0.9.1605 Azbox HD
Release Notes
Be carefull! Channel list will be removed after updating
Fixed
- Wrong information of DVB-S2 frequency
Fixed
- Disappear & hang up on FTP menu
Fixed
- WMA Pro don't work at all over SPDIF and HDMI
Fixed
- At channel info bar (Zapping bar) appear Actual and next program and not only actual like actually
FIxed
- Signal meter takes too long to update (10 seconds) or more. At this way signal meter is useless
Fixed
- Timeshift / Pause and record don't work at USB, using FAT32 or EXT3
Fixed
- Timeshift at HD channels don't work very fine, receiver looks like a crazy horse
Fixed
- Improve API, to don't stop EMUlators, API sometimes get's losted Stressed.
Fixed
- MKV, if MKV have 2 tracks DTS and AC3, at AC3 cannot be played
Fixed
- OGG Vorbis don't supported at MKV files
Added
- Possibility of change color of subtitles
Added
- Increase the maximum size of subtitles, at HD contents the maximum size allowed by azbox, still small
Added
- Possibility to change positions of subtitles, goal is be possible put subtitles at black line, when movie broadcasted at 16:9
Fixed
- mkv-files: selction of different audiotrack's is without effect.
Fixed
- Pic-viewer: scaler/ optimizer very slow, aspect ratio incorrect
Fixed
- Chinese charset instead of latin lower case letter, while using rename feature, create albuns, etc.
Added
- FTP CLIENT
Fixed
- FilmBox HD image freeze
0.9.1759
0.9.1759
Code:
[B]Release Notes[/B]
[B]Fixed[/B]
- Support some high-bitrate contents
- Bugs on playing WMV with WMAPRO
- WMV file in media player cause box hang up, and need reboot
- Size of subtitles not saved
- |<< and ****| should change song
- TXT subtitles that don¡¯t work (mpl2 and tmplayer)
- << and **** not working, it should be more intuitive, One press should
make advance just few seconds, if keep pressing button more faster
- RSS don't work at some link:
ht_p://servis.idnes.cz/rss.asp?c=zpravodaj
ht_p://serwisy.gazeta.pl/rss/0,0.html <-- Not RSS site
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_swiat.xml
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_nauka.xml
ht_p://rss.gazeta.pl/pub/rss/gazetawyborcza_kraj.xml
- Input of password for WEP is extended to 256 digit
- Example, i make scan at One TP that don0t exist on table (let's say
Hellas Sat 10956 V) i scan it, appear message Save channels i plug
YES, than he returns back to menu of scan i make exit, and i scan
another TP, scan is OK or failed, and i go back to TV Mode to watch
channels that i scan on first, but when i p*ick they i got "NO SIGNAL"
message, like if TP infos (S/R, FEC, PID's... are lost on STB).
- User should add new frequency on EDIT menu
- SR and transponder mHZ should have only 5 input fields and not 6
- When Go to TV Channel Menu, and press some Scan option, go first to
satellite that are used at moment. Now all times goes to 4.0E channels,
so if i have dish at Hispsat Dish starting moving uneseraly
[B]Added[/B]
- SSlovenian and French OSD
- User can capture the snapshot of TV using the "CHECK" key on REMOTE
- WPA-PSK and WPA2-PSK on Wireless LAN
- drivers(usbserial.ko & ftdi_sio.ko) for Infinity USB smart
- User defined shell which not be overwritten after upgrading firmware
- You can find the sample shell script in /DISK2/etc/start.d/
- At satellite list be possible sort by Position (0¨¬E to 260¨£E) and by Satellite name0.9.1759
Code:
http://rapidshare.com/files/220164526/patch_1759.rar0.9.1868
Fixed
- If do a scan at for example some TP on Hotbird and have more than one satellite scanned,
when go back to TC always go to position 001 at channel list, what is big inconvenience if you have motorized dish,
because will jump for satellite that have channel at position 001.
Cursor should go for channels position of scanned TP.
Fixed
- Some Polish channels like TVP1, Universal, Sci-Fi, MGM can`t get EPG data info
Fixed
- Some channels (like Filmbox HD) at Hotbird need go catch EPG info at other TP, actually AzBox cannot support that
Fixed
- Quality of pictures using photo player is very bad, this should be improved
Fixed
- ISO files do not work anymore (none at all). Box hangs if you try to play them.
Add
- Auto-Detect Tuners plugged and add support for Combo models and DVB-T and DVB-C twin tuner support
Add
- At Satellite list show not only the satellite name but also satellite position
Add
- When we played ISO (backup DVD) we don¡¯t have possibility choose outside subtitles from files
Add
- Auto Scale Pictures to 1920x1080, with option to keep or not the original aspect ratio
Add
- Storage Create option: HDD standby, receiver should put HDD in standby if during some minutes not usage, to save energy and HDD life
Add
- TV Channel After finish Scan and decide if Store or not store scanned channels, go directly to menu of Scan channel
Add
- Data Reset Option to erase all Plug-ins
Add
- Support uncommitted Diseqc and committed Diseqc at same time
Add
- Change Font by User
1. Copy your_font.ttf to USB storage and plug it on AZBOX
2. Go to 'System Information' of Setting
3. Press OK on Font Setup
Download
Fixed
- If do a scan at for example some TP on Hotbird and have more than one satellite scanned,
when go back to TC always go to position 001 at channel list, what is big inconvenience if you have motorized dish,
because will jump for satellite that have channel at position 001.
Cursor should go for channels position of scanned TP.
Fixed
- Some Polish channels like TVP1, Universal, Sci-Fi, MGM can`t get EPG data info
Fixed
- Some channels (like Filmbox HD) at Hotbird need go catch EPG info at other TP, actually AzBox cannot support that
Fixed
- Quality of pictures using photo player is very bad, this should be improved
Fixed
- ISO files do not work anymore (none at all). Box hangs if you try to play them.
Add
- Auto-Detect Tuners plugged and add support for Combo models and DVB-T and DVB-C twin tuner support
Add
- At Satellite list show not only the satellite name but also satellite position
Add
- When we played ISO (backup DVD) we don¡¯t have possibility choose outside subtitles from files
Add
- Auto Scale Pictures to 1920x1080, with option to keep or not the original aspect ratio
Add
- Storage Create option: HDD standby, receiver should put HDD in standby if during some minutes not usage, to save energy and HDD life
Add
- TV Channel After finish Scan and decide if Store or not store scanned channels, go directly to menu of Scan channel
Add
- Data Reset Option to erase all Plug-ins
Add
- Support uncommitted Diseqc and committed Diseqc at same time
Add
- Change Font by User
1. Copy your_font.ttf to USB storage and plug it on AZBOX
2. Go to 'System Information' of Setting
3. Press OK on Font Setup
Download
It was withdrawn and now, it's BACK WITH A BANG!!!!!!!!!!!!!:clappingownload it straight into your receiver and install... :thum:
YES, YES, YES, YEEEEESSSSSSSSSSSSS!!!!!!!!!!!!!
OK, 8in1 older switches [v. 1] are now catered for, too - with FW 0.9.1868!!! Instant switching, no waiting, no noise in the dead of night and your neighbours or/and your darlin' cursing you... Superb!!!
Here is how I did it:
HOME button on your remote -> Settings -> TV Channel -> Antenna Setup -> DiSEqC -> hit the left arrow to get to the option named Combination -> press OK on your remote, then set it all up for your x amount of LNBs...
I have 8 LNBs on a toroidal dish, with an 8in1 switch, so here is how I got them all working [the first time, hehe!!], i.e. the winning combination for AZbox HD is:
Sat postion 1 = [I reversed the Command Order to] Uncommit./Commit. + [Committed DiSEqC] Switch A + [Uncommitted DISEqC] Switch 1
Sat postion 2 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 1
Sat postion 3 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 1
Sat postion 4 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 1
Sat postion 5 = Uncommit./Commit. + Committed DiSEqC Switch A + Uncommitted DISEqC Switch 2
Sat postion 6 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 2
Sat postion 7 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 2
Sat postion 8 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 2
It really seems to be the "intelligent solution", as touted!!!!! I just thought a little bit [and I am NOT an expert!!!], then made a few choices and voila! They were working!!!!
And I think we can connect loads more LNB's thanx to this "intelligent solution!!!
Indeed, I am planning to put up 16 Twin LNBs, each feeding 2 Sat TV tuners with 2 cables going out of each, ino various switches, eventually sending only 2 cables down to my AZbox HD, one per sat TV tuner, so I will be able to easily watch something and record something else... Peace!
One great step forward for AZbox HD, as many types of HW are now "covered"!!! BRAVO!!!!!!!!!!!!!!!!!
ownload it straight into your receiver and install... :thum:YES, YES, YES, YEEEEESSSSSSSSSSSSS!!!!!!!!!!!!!
OK, 8in1 older switches [v. 1] are now catered for, too - with FW 0.9.1868!!! Instant switching, no waiting, no noise in the dead of night and your neighbours or/and your darlin' cursing you... Superb!!!
Here is how I did it:
HOME button on your remote -> Settings -> TV Channel -> Antenna Setup -> DiSEqC -> hit the left arrow to get to the option named Combination -> press OK on your remote, then set it all up for your x amount of LNBs...
I have 8 LNBs on a toroidal dish, with an 8in1 switch, so here is how I got them all working [the first time, hehe!!], i.e. the winning combination for AZbox HD is:
Sat postion 1 = [I reversed the Command Order to] Uncommit./Commit. + [Committed DiSEqC] Switch A + [Uncommitted DISEqC] Switch 1
Sat postion 2 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 1
Sat postion 3 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 1
Sat postion 4 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 1
Sat postion 5 = Uncommit./Commit. + Committed DiSEqC Switch A + Uncommitted DISEqC Switch 2
Sat postion 6 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 2
Sat postion 7 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 2
Sat postion 8 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 2
It really seems to be the "intelligent solution", as touted!!!!! I just thought a little bit [and I am NOT an expert!!!], then made a few choices and voila! They were working!!!!
And I think we can connect loads more LNB's thanx to this "intelligent solution!!!
Indeed, I am planning to put up 16 Twin LNBs, each feeding 2 Sat TV tuners with 2 cables going out of each, ino various switches, eventually sending only 2 cables down to my AZbox HD, one per sat TV tuner, so I will be able to easily watch something and record something else... Peace!
One great step forward for AZbox HD, as many types of HW are now "covered"!!! BRAVO!!!!!!!!!!!!!!!!!
- Status