Search results

To all new members need a Darkman_TMLoader_187 here http://www.sat-universe.com/showthread.php?t=68957 to upload to your receiver from your PC. 1, Connect the null model cable to the RS-232C connection on the back of the receiver and to your PC. (TURN OFF THE SATELLITE RECEIVER.) 2, Download...

New Loader for TM-1000 and 5000 Series 187 Here is Loader for TM-1000 and 1500 Series..

TM9100 Newbies Welcome to the section! If you have never used/owned a Linux receiver before it can all seem a bit daunting at first, leaving you with many questions. Most, if not all your initial questions are answered in our guides section, (as they were based on our members commonly asked...

Satellite TV will have Sun-Stroked! Even on a cloudy day the sun can cause trouble if is`s lined up behind your chosen sateliite. Solar Outage season is upon us. The sun may have been most noticeable by its absence this summer, but every year, in the autumn and in the spring, whether you can...

horizon meter HDSMv2-5user.pdf

User guide for various Manhatton Plaza ST Models This manual is for the 300mm cabinet Plaza ST models: - Plaza ST 100 (FTA) - Plaza ST 120 (FTA with Embedded Iredto) - Plaza ST 200 (CI) - Plaza ST-300 (CI with Embedded Iredto)

Humax 5400 Service Manual

Technomate 4200 combo User manual for tm4200 combo receiver (digital sat & digital terestrial)

This is for newbies and hopefully describes what you are trying to do. The trouble with the arc is - that you can't actually see it - It's an invisible line if you like. Here's another analogy: Imagine it as a big rainbow - one end starts as far as you can see east - and the other end is as...

cables may be rigid or flexible. Rigid types have a solid sheath, while flexible types have a braided sheath, usually of thin copper wire. The inner insulator, also called the dielectric, has a significant effect on the cable's properties, such as its characteristic impedance and its...

Digicon F-Connector Installation Guide

Thought this would help those who want some guidance on installing a monoblock LNB. Just move the LNB so the clamp holds the other side if the dish is pointing to 13E. Same principle applies for all sats which are 6deg apart.

Connect 8 LNB Connect 16 LNB Diseqc 1.2 motor + 4 LNB

his will help new member's to understand what we are talking about, Low noise block downconverter ( LNB ) Have you ever wondered what is an LNB and what an LNB LO frequency ? Here is some information about LNBs that I hope will help explain matters. The abbreviation LNB stands for Low Noise...

How to fit a f connector to coaxial cable

Cut the cable insulation as described here: Use two "F" connectors, on both ends of the cable. Connect one end to the LNB of the dish and the other one to the receiver. Look @ photo 1 ================================================== ==========

This is for newbies and hopefully describes what you are trying to do. The trouble with the arc is - that you can't actually see it - It's an invisible line if you like. Here's an analogy: Imagine it as a big rainbow - one end starts as far as you can see east - and the other end is as far as...

Just to give you an idea of what is possible with a fixed dish besides the monoblock 13 east & 19.2 east there are a lot more combinations that will give you a chance to do some experiments, 1/ patch set up, 2 dishes required a 80cm & a 60cm, 80cm aimed @ 13 east, this is the Lnb set up 19.2...

This guide is for improving your tracking of the arc by getting the settings on your Lnb & dish set for best results, Correct settings = maximum signal. 1/ Lnb, The skew can vary from each set up but most of the time I have found that 2.5 mm to the right works for my current set up, It is...

Here is a guide to the increase in the surface size of a larger dish - how much more signal can hit the dish. Also the wind load figures in a 100mph wind. This is the amount of wind pressure hitting the dish. If the dish was flush at the end of tube, the full pressure would push on the dish. As...