Recent content by mdt

As new as purchased from America about 5 years ago,box opened but not been touched. Will wipe the floor with a superjack equivalent. £100 cash on collection or buyer pays postage (uk only) cost over £230 but as I've a 1224 now it's not going to be used,PM if interested P.s. will make...

There are external usb cards available, @barney115 and others use them with great success and as for your concern about taking you're PC apart it's usually just a case of a couple of screws to remove the access panel at the side of the tower and just slotting the card into a spare socket on...

Even though I have installed at a guess over 100 satellite systems from simple zone 1 sky dishes through to 1.1m triax on usals motor and everything in between it's all been on an enthusiast basis. I'm now going to be putting up my own personal system comprising of a 1.2m Andrew dish, jeager...

Is the dish going on on south facing wall? ,also depending on length and how much of the pole is above the top K can make a big difference in stability Probably best to get the installer to advise on T and K brackets and length of pole after assessing your particular situation. Maximum dish...

Could you post a couple of photos of the insides so we can have a look,regards

You can only try pal, back in the early days of sat I put Vaseline on the exposed nuts,bolts ECT on my 90cm/128 and it was still bone dry when it was removed nearly a decade later but water has a knack of finding a way,regards

Got a few old superjack here if you need any innards let me know, regards

Don't have a heavy duty 24in superjack to look at the inside but maybe you could fix it from a part of a knackered one as there isn't much to them inside, regards

You say you have ruled out the v-box as it runs a spare actuator without issues then it looks like it is a problem with the heavy duty actuator. As said by others it's a case of elimination. Something is causing the reed switches to keep blowing but if the spare jack doesn't blow reed...

No one can say with certainty which lnb is best for feeds as same type lnb from same batch can vary, 2 people with identical systems living 500 yards apart again different results. There are to many different things in play so the best advice is if finances allow it's trial and error until...

Agreed but Ethernet is a hard connection and less susceptible to all the RF signals flying around Imo especially these days Regards

What make of motor?, also are the spidering and zgemma in separate rooms? If you haven't already tried it switch both receivers off at the mains and leave for 10 minutes say,then switch 1 back on then tell motor to go to zero but set usals to 000.0/000.0 and go outside to check if motor is...

You could use an offset dish like a few members on here. There are a few ways you could choose. 1. Buy Chinese C/Ku combo with off-set scalar kit 2. Buy Chinese C band lnb and scalar kit then attach your own Ku lnb D.I.Y 3. Buy C/Ku Polarotor and separate single pol lnb,s and a Ku scalar but...

Atm 80cm orbital,black ultra,darkmotor,dh-hd d15 68.5e to 30w Other stuff Dh-hd f15 Dr-hd d15 x 4 Tm5402hd m1 TM5402HD M2 Tm5402hd m3x2 Tm5302hd v2 Blade bm7000hd Tm f3/5 V1 TMF3/5 V2 DM800HD CLONE DM800HD ORIGINAL DM800HDSE CLONE Andrew 1.2m x 4 Andrew 1.0m x 2 Andrew .90m x 3 Visiosat...

been messing with an old tm600 and got it running oscamymod t52, reading a ftv 0963 card and c line as a reader. trying to change to the latest oscam that it will take but it wont accept a tar.gz file via tmp manuall install. has anyone got a oscam.bin file so i can just replace the ymod...