who have good image of ssl84d 800hd se Sunray4 sim 2.1.0 ?
i used this version can't lock T2 channel in my side, only locked satellite channel well
i used this version can't lock T2 channel in my side, only locked satellite channel well
For this image, you must add the DVB-T2 frequencies into the satellite.xml file.Tuner not problem, can lock C and S2 both, only can't lock T2 channel via Sunray-triple tuner.
only need correct image
sure, this image show Tuner A DVB-S2, Tuner B DVB-T and Tuner C DVB-C and my 800SE https://pasteboard.co/EMBDUtYNZI0m.pngand are you sure that your tripletuner also supports DVB-T2 ?
are you have good image of 800HD SE Sunray 4 ?For this image, you must add the DVB-T2 frequencies into the satellite.xml file.
example:
<sat name="DVB-T" flags="0" position="098">
<transponder frequency="1578500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1606500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1592500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1585500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1571500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
</sat>
Change the frequency's and symbol rate for your region.
Then in satellite setup you will have a satellite called DVB-T, you must then assign it a LNB number, e.g LNB 3
and the LNB type is set to User defined.
LOF/L is 00000
LOF/H is 00000
Threshold is 00000
Make sure the dvb-t2 coax cable is plugged into the t2 port on the tuner. Do a single satellite scan on DVB-T satellite and if you have entered the frequencies correctly it will scan the dvb-t2 channels
it seems that you will have to use a USB tuner for DVB-T/T2sure, this image show Tuner A DVB-S2, Tuner B DVB-T and Tuner C DVB-C and my 800SE https://pasteboard.co/EMBDUtYNZI0m.png
Product Description
Sunray sr4 Triple Tuner -T -C -S(2S) 3 in 1 tuner
This type is for T
tried your way still same can't lock T2 channel, tried many different image not help also, i think need correct image can solve .For this image, you must add the DVB-T2 frequencies into the satellite.xml file.
example:
<sat name="DVB-T" flags="0" position="098">
<transponder frequency="1578500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1606500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1592500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1585500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
<transponder frequency="1571500" symbol_rate="07000000" polarization="2" fec_inner="0" inversion="1" modulation="0" system="0" pilot="0" rolloff="0" />
</sat>
Change the frequency's and symbol rate for your region.
Then in satellite setup you will have a satellite called DVB-T, you must then assign it a LNB number, e.g LNB 3
and the LNB type is set to User defined.
LOF/L is 00000
LOF/H is 00000
Threshold is 00000
Make sure the dvb-t2 coax cable is plugged into the t2 port on the tuner. Do a single satellite scan on DVB-T satellite and if you have entered the frequencies correctly it will scan the dvb-t2 channels
tryget T2 tuner of 800HD SE is very hard now