Ramboide
Registered
- Messages
- 202
I use the text editor "NotePad++, and send the orders by Telnet with "Dreambox Control Center Enigma 2".I did not understand with which program you change the lamedb? Do I use an FTP program?
I use the text editor "NotePad++, and send the orders by Telnet with "Dreambox Control Center Enigma 2".I did not understand with which program you change the lamedb? Do I use an FTP program?
0ce40000:ea7e:0001
s 10922000:16400000:1:7:-300:2:0:1:2:0:2
/
070a:0ce40000:ea7e:0001:1:0:0
Abertis PID 802
p:ABERTIS:c:031fff,c:150322,C:2600,f:1
root@zgemmah9combo:~# astra --analyze http://localhost:8001/1:0:1:70A:EA7E:1:CE40000:0:0:0:
Nov 25 06:19:00: INFO: Starting Astra SM 0.2
Nov 25 06:19:00: INFO: PAT: tsid: 60030
Nov 25 06:19:00: INFO: PAT: pid: 16 NIT
Nov 25 06:19:00: INFO: PAT: pid: 802 PMT pnr: 1802
Nov 25 06:19:00: INFO: PAT: crc32: 0x6782915C
Nov 25 06:19:01: INFO: Bitrate: 33162 Kbit/s
Nov 25 06:19:01: ERROR: Scrambled: 802=20888
Nov 25 06:19:02: INFO: Bitrate: 34741 Kbit/s
Nov 25 06:19:02: ERROR: Scrambled: 802=23097
Nov 25 06:19:03: INFO: Bitrate: 34742 Kbit/s
Nov 25 06:19:03: ERROR: Scrambled: 802=23098
Nov 25 06:19:04: INFO: Bitrate: 34742 Kbit/s
Nov 25 06:19:04: ERROR: Scrambled: 802=23098
^CNov 25 06:19:05: INFO: [main] shutting down
root@zgemmah9combo:~#
That’s it, we just need constant.cw to play CW well.This is what initially gave me this mistake.
I’m testing all kinds of possibilities.
Thank you Adán792
HTTP ERROR "http://127.0.0.1:9981/api/raw/export" 403 Forbidden
Not possible with softcam?Have you created a user in TVHeadend (it might need admin ticked, and access via network 127.0.0.1/32)? I have one called 'json' and then a password in passwords set also to 'json' for user 'json'. Then on line 27 and 28 in tvh-json.py you need to put that user/pass -
Code:TVH_USER=env('TVH_USER', 'json') TVH_PASS=env('TVH_PASS', 'json')
You might need to change the line below from ('TVH_AUTH', 'digest') to ('TVH_AUTH', 'plain') depending on your TVHeadend version/settings too if it still doesn't work.
Not possible with softcam?
Yes, it is now running with softcam but does not open the channel, same as with constantI’m not sure, I’ve only ever got it working using constant.cw in OSCam, using the format I posted above (with the fake SID and PMT info for each service). I think because of that fake service info you would also need to modify the softcam info if you use that instead.
Yes, it is now running with softcam but does not open the channel, same as with constant
is correct?I’m not sure, I’ve only ever got it working using constant.cw in OSCam, using the format I posted above (with the fake SID and PMT info for each service). I think because of that fake service info you would also need to modify the softcam info if you use that instead.
is correct?
2600:000000:0322:1FFF:0000 #ECM_L:11 #CW=0BBDXXXXXXXXXXXXXXXXXXXXXXXX1F
(dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
(dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT
(dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
(dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1F40 VPID 0322
(constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0322 ECMPID 1FFF PMTPID 1F40 VPID 0322
(constcw) Entry found: 2600@000000:0322:1F40:1FFF:0322:XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
(ecm) tvheadend (2600@000000/0000/0322/07:ED409C6107B8BECE6626C07BC949D8AC): found (1 ms) by BISS
Looks correct, what do you get in TVHeadend status and log when trying to tune the channel?
Here's an example for me with PID 8001 RGE Madrid -
So I have 12631V being tuned by the satellite card, automatically triggered by the relayed IPTV stream.
Then I have the IPTV input #1 with ~19500kbps bandwidth (the bandwidth shows that the correct amount of data is coming through) which is the output of the tdt.sh script.
In the log you can see it executes the script, which then triggers the tune to 12631V and triggers the OSCam request to descramble. For 10922V TVE UHD you should see a second IPTV input for the astra-sm stream after the tdt.sh one. You can see where it's failing if you see one of the Input streams not being triggered, or if anything has a bandwidth of 0.
In OSCam, for TVE UHD I get -
Code:(dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0 (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1F40 VPID 0322 (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0322 ECMPID 1FFF PMTPID 1F40 VPID 0322 (constcw) Entry found: 2600@000000:0322:1F40:1FFF:0322:XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX (ecm) tvheadend (2600@000000/0000/0322/07:ED409C6107B8BECE6626C07BC949D8AC): found (1 ms) by BISS
8C4BE4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1F40 VPID 0322
2022/11/25 15:50:49 24355795 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0322 ECMPID 1FFF PMTPID 1F40 VPID 0322
2022/11/25 15:50:49 24355795 p (constcw) Entry found: 2600@000000:0322:1F40:1FFF:0322:0B BD 82 4A A1 11 6D 1F 0B BD 82 4A A1 11 6D 1F
2022/11/25 15:50:49 178C4BE4 c (ecm) anonymous (P: 2600:000000:0322:1FFF:0000 #ECM_L:11 #CW=0BBDXXXXXXXXXXXXXXXXXXXXXXXX1F HOP:00): found (1 ms) by constant.cw
It’s what I feared since yesterday, it only activated for a moment the IPTV network, received STB signal and does decoding normally. That must be the problem, you don’t get t2mi decap. The network you add must be Auto? I added the other one.Looks correct, what do you get in TVHeadend status and log when trying to tune the channel?
Here's an example for me with PID 8001 RGE Madrid -
So I have 12631V being tuned by the satellite card, automatically triggered by the relayed IPTV stream.
Then I have the IPTV input #1 with ~19500kbps bandwidth (the bandwidth shows that the correct amount of data is coming through) which is the output of the tdt.sh script.
In the log you can see it executes the script, which then triggers the tune to 12631V and triggers the OSCam request to descramble. For 10922V TVE UHD you should see a second IPTV input for the astra-sm stream after the tdt.sh one. You can see where it's failing if you see one of the Input streams not being triggered, or if anything has a bandwidth of 0.
In OSCam, for TVE UHD I get -
Code:(dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 (dvbapi) Demuxer 0 found 1 ECM pids and 1 STREAM pids in CA PMT (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0 (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1F40 VPID 0322 (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0322 ECMPID 1FFF PMTPID 1F40 VPID 0322 (constcw) Entry found: 2600@000000:0322:1F40:1FFF:0322:XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX (ecm) tvheadend (2600@000000/0000/0322/07:ED409C6107B8BECE6626C07BC949D8AC): found (1 ms) by BISS
Code:8C4BE4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 1F40 VPID 0322 2022/11/25 15:50:49 24355795 p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0322 ECMPID 1FFF PMTPID 1F40 VPID 0322 2022/11/25 15:50:49 24355795 p (constcw) Entry found: 2600@000000:0322:1F40:1FFF:0322:0B BD 82 4A A1 11 6D 1F 0B BD 82 4A A1 11 6D 1F 2022/11/25 15:50:49 178C4BE4 c (ecm) anonymous (P: 2600:000000:0322:1FFF:0000 #ECM_L:11 #CW=0BBDXXXXXXXXXXXXXXXXXXXXXXXX1F HOP:00): found (1 ms) by constant.cw
It’s what I feared since yesterday, it only activated for a moment the IPTV network, received STB signal and does decoding normally. That must be the problem, you don’t get t2mi decap. The network you add must be Auto? I added the other one.
astra --analyze "t2mi://#t2mi_plp=0&t2mi_pid=4096&t2mi_input=http://127.0.0.1:9981/stream/mux/<UUID of IPTV mux #1>?pids=4096"
command not foundLooks like your first IPTV input is at least tuning the 10922V service then? That log looks correct.
If you take the TVH link for your first IPTV mux (the tdt.sh <UUID> <PID> one) and then in a terminal window run -
Code:astra --analyze "t2mi://#t2mi_plp=0&t2mi_pid=4096&t2mi_input=http://127.0.0.1:9981/stream/mux/<UUID of IPTV mux #1>?pids=4096"
What is the output?
For my PID 802 UHD, this is what it looks like, there's no auto IPTV network. I'm using two separate networks (one called 'TDT' and one called 'T2-MI', both set to "max no input streams: 1", but they're set up identically otherwise. I only do this because I have a single output LNB for 30°W and T2-MI + Abertis would be 2 input streams, where normally only 1 is possible) -
command not found
configure.ac:726: the top levelSeems like astra-sm did not build or install in the end in that case, that's needed to get the UHD mux, otherwise only the regular Abertis muxes with the SD/HD channels will work (with single tdt.sh IPTV mux)
astra/core/child.c: In function ‘asc_child_close’:
astra/core/child.c:471:41: error: ‘sys_siglist’ undeclared (first use in this function)
471 | , signum, sys_siglist[signum]);
| ^~~~~~~~~~~
astra/core/child.c:471:41: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [Makefile:2005: astra/core/child.lo] Error 1
make[2]: se sale del directorio '/home/astra-sm/src'
make[1]: *** [Makefile:1119: all] Error 2
make[1]: se sale del directorio '/home/astra-sm/src'
make: *** [Makefile:443: all-recursive] Error 1
Probably due to an error when you edit lamedb.where am i wrong? I enter telnet, give the init 4 command, enter FTP and modify the lamedb and save, then always tenet, give the init 3 command and restart the decoder on restart all the channels of the setting disappeared N/A
try the following:where am i wrong? I enter telnet, give the init 4 command, enter FTP and modify the lamedb and save, then always tenet, give the init 3 command and restart the decoder on restart all the channels of the setting disappeared N/A
Do you have solved the problem for DreamOS 2.6?i' Want to build for AArch64 in enigma
but astra-sm support only ARM & MIPS
In Debian 10 I have been able to compile well, I do not know if it is due to the version or that the 11 has tired of me...Seems like astra-sm did not build or install in the end in that case, that's needed to get the UHD mux, otherwise only the regular Abertis muxes with the SD/HD channels will work (with single tdt.sh IPTV mux)
I give up, same channels N/A, I'll search the net if I find a backup x octagon sf4008try the following:
run init 4 via telnet
then modify lamedb and save it
then run via telnet shutdown now -r
your receiver will restart
when it boots up, check if the channels are still there