Oscam Manual
- Thread starter elgeneral
- Start date
- Status
How to install OSCAM to UBUNTU
Since many have been trying to get OSCAM working on UBUNTU with no luck, decided to write up a quick tutorial for getting it to work.
(I have had this running for a couple of days now on ubuntu server, with an ORANGE sub (096c), glitch free)
oscam.server
oscam.user
now back to terminal:
now check /var/log/oscam.log for the news..
also,
to calculate boxkey for the new orange sub:
1. get your 11 digit box serial (101*******5)
2. remove the last digit ONLY (101*******) and type it in the windows cal in dec mode
3. click hex. this will give you the exact 8 digit hex to put in your oscam.server.
Also,
I have tested the windows version of oscam which requires cygwin (using usb phoenix 6 mhz), and its too slow. Ecm transaction takes 1300ms compared to 300 ms on dm internal compared to 205 ms on ubuntu with usb phoenix running 6 mhz.
Gracias a jtc2005
Since many have been trying to get OSCAM working on UBUNTU with no luck, decided to write up a quick tutorial for getting it to work.
(I have had this running for a couple of days now on ubuntu server, with an ORANGE sub (096c), glitch free)
Code:
cd /lib/
sudo ln -s libcrypto.so.0.9.8e libcrypto.so.0.9.8
sudo apt-get install yum
cd /usr/local/bin/
sudo apt-get install subversion
sudo svn co http://oscam.ump2002.net/svn/oscam/trunk oscam-svn
cd oscam-svn/
sudo apt-get install cmake
sudo mkdir build_dir
cd build_dir
sudo cmake /usr/local/bin/oscam-svn
sudo make
sudo make install
now make your configuration files and place them in /usr/local/etcoscam.server
Code:
[reader]
label = fx
protocol = mouse
detect = CD
device = /dev/ttyUSB0
mhz = 600
EMMCache = 1,1,2
Group = 1
caid = 096c
boxid = ********
oscam.conf
Code:
[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 10000@096c:000000;oscam.user
Code:
[account]
user = test
pwd = test
uniq = 1
group = 1
au = fx
ident = 096c:000000
caid = 096cnow back to terminal:
Code:
sudo oscam -bnow check /var/log/oscam.log for the news..
also,
to calculate boxkey for the new orange sub:
1. get your 11 digit box serial (101*******5)
2. remove the last digit ONLY (101*******) and type it in the windows cal in dec mode
3. click hex. this will give you the exact 8 digit hex to put in your oscam.server.
Also,
I have tested the windows version of oscam which requires cygwin (using usb phoenix 6 mhz), and its too slow. Ecm transaction takes 1300ms compared to 300 ms on dm internal compared to 205 ms on ubuntu with usb phoenix running 6 mhz.
Gracias a jtc2005
- Status