viewing 4:2:2 feeds

foxx®

VIP
Messages
2,794
First check if the key is correct and valid, or try another player (for example mpc player), or restart emu or cam. If it doesn't work then try some other emu or cam. If even then it doesn't work, then try to stream anything, any channel or some fta feed, so that by chance it's not a webifo or firewall problem, so it doesn't allow you to stream from the box.
 

fozzer12

Registered
Messages
11
I tried with a 4:2:0 feed which was biss and that streamed fine just not the 4:2:2 one they key was fine double checked it
 

Pabloisred

Registered
Messages
28
I am not up to speed on the TBS USB devices, the only one I have used personally is the TBS5925 which is an older model.
It was replaced by the TBS5927 which included a small fan to cool it down.

If you go to the TBS website it should have the list of currently available DVB USB devices.
Thanks Moonbase , I may be better purchasing Octagon SF8008 and relaying it back to the VLC.
 

sens333

Donating Member
Messages
102
Hi guys,
So I have VU+ zero 4k and TBS5925 USB tuner.

I temporarily moved to a new place and have a 1.2 offset with USALS motor here.

Would a setup like this work for both 4:2:2/4:2:0 feeds and USALS controls:
Sat cable in TBS5925 for 4:2:2 via EBSpro and VLC + USALS controls
Sat cable out of TBS5925 for VU+ 4:2:0 feeds to watch on TV (motor adjusted by TBS USB card).
Only thing Im not 100% sure and experience with is controlling USALS with the USB card.
Thanks for any tips or suggestions! :)
 

Crazy Sat

Donating Member
Messages
324
I use a Priority Swith .
Input from a gregiorian disch 90 cm.
As master output : Edision mio 4K , working with usals. for 4:2:0
As slave output : TBS 5925 + EBS Pro or DVBDream with Elecard video codec to see the feeds in 4:2:2

 

Attachments

  • prior.jpg
    prior.jpg
    43.2 KB · Views: 7

kegnkiwi

Super VIP
Donating Member
Messages
916
I use a Priority Swith .
Input from a gregiorian disch 90 cm.
As master output : Edision mio 4K , working with usals. for 4:2:0
As slave output : TBS 5925 + EBS Pro or DVBDream with Elecard video codec to see the feeds in 4:2:2

Have you tried logging into the webif on your Edison mio 4k and then opening the stream on a laptop. I can open 4:2:2 streams on my laptop when being fed from the qviart dual 4k. The only time if gets difficult is when there are multiple 4k streams that are encrypted.
 

Crazy Sat

Donating Member
Messages
324
Yes, sometimes I also stream via Webif on my Edision mio 4K or Octagon sf8008 to PC, It works well, but I have a problem with the HEVC codec on certain feeds.
 
Top