bozomustafa_68
Registered
- Messages
- 16,935
Neue Software für die VANTAGE HD Serie
Code:
*Version 2.71 ( Beta )
Last edited:
*Version 2.71 ( Beta )
28-01-11 Release note
IMPORTANT please read:
If you encounter problems after the update, do a factory reset with the menu item "Installation / Preferences / Factory Settings ".
Please backup before the factory reset your settings -> Menu / Software Manager / System backup
To perform a software update:
1. Unzip the file on a USB disk.
2. Now connect the USB device to the receiver,
3. The receiver then from the menu / multimedia / media / USB update the file "*. dlp" from USB disk
4. Confirm the question with "Yes"
5. The update is complete when the receiver restarts.
01/28/2011 version 02.07M-O
Improvements:
- Move in Vantage Player possible now without crashing
- Fixed bug in Czech language
- Fixed a timer recording bug.
was set o timer did not start at the scheduled day but the day on which the timer.
- Blind Scan fixed when VT-600C
o Receiver has saved after blind scanning the wrong frequencies.
04/04/2011
Release Note
IMPORTANT, please read:
If you experience problems after the update, do a factory reset with the menu item "Installation / Preferences / Factory Settings ".
Please backup before the factory reset your settings -> Menu / Channel Setup / Software Manager /
To perform a software update:
Unzip the file on a USB disk.
Now connect the USB device to the receiver.
The receiver then from the menu / multimedia / USB update the file "*. dlp" from USB disk
Confirm the question with "Yes"
The update is complete when the receiver restarts.
Getting started
the update takes about 5 minutes. The channel list accepted. If you do not use the default channel list, save your channel list before on the USB stick.
Changes:
Initialization of the disk changed. This provides more stability. If you "Save EPG" on to have, every time you restart a window appears.
During this time, the EPG to load data.
Release Note
IMPORTANT, please read:
If you experience problems after the update, do a factory reset with the menu item "Installation / Preferences / Factory Settings ".
Please backup before the factory reset your settings -> Menu / Software Manager / Windows system.
To perform a software update:
Unzip the file on a USB disk.
Now connect the USB device to the receiver.
The receiver then from the menu / multimedia / media / USB update the file "*. dlp" from USB disk
Confirm the question with "Yes"
The update is complete when the receiver restarts.
Getting started
the update takes about 10 minutes. The channel list is included. If you do not use the default channel list, save your channel list before on the USB stick.
Changes:
Improve the reception with 2 CI modules.
Yours sincerely,
Your VANTAGE - Support
Unzip the file on a USB disk.
Now connect the USB device with the receiver.
On the receiver, then from the menu / multimedia / USB update the file "*. dlp" from USB disk
Confirm the prompt with "Yes"
The update is complete when the receiver restarts.
Getting Started:
- The update takes about 5 minutes. The channel list over. You should not use the default channel list, save your channel list before on the USB stick.
Changes:
- With the timer recording is now the box is 10 min. switched on earlier. This is necessary due to the initialization of the hard drive was introduced in 2.75. This provides more stability. If you "EPG Save" to have, every time you start a window pops up. During this time, the EPG data to be loaded and ran a check disk. EPG should save to "Off" to be the Check Disk in the first few minutes is performed in the live image.
Sincerely,
Your VANTAGE - Suppor
Unzip the file on a USB disk.
Now connect the USB device with the receiver.
On the receiver, then from the menu / multimedia / media / USB update the file "*. dlp" from USB disk
Confirm the prompt with "Yes"
The update is complete when the receiver restarts.
Getting Started:
the update takes about 10 minutes. The channel list is taken. You should not use the default channel list, save your channel list before on the USB stick.
Changes:
90min limit in the Swiss cable network (Cablecom) fixed.
Channel lists update for N24 HD.
OSD Update for the Danish language
Sincerely,
Your VANTAGE - Support
Version 2.16M-O
Changes:
- Fixed crashes when you press the Info button on RTL.
Changes:
- Error message on RTL with HbbTV fixed.
*17.10.2011
Änderungen:
*Abstürze auf dem Transponder von 3Sat, ZDf Neo usw. behoben
18-10-11
Release Note
IMPORTANT, please read:
If you experience any problems after the update, perform a factory reset with the menu item "Installation / Settings / Factory Settings".
Please backup before the factory reset your settings -> Menu / Software Manager / System Backup.
To perform a software update:
17/10/2011 Version 2.18m-O
Unzip the file to a USB disk.
Now connect the USB device with the receiver.
On the receiver, then from the menu / multimedia / media / USB update the file "*. dlp" from the USB disk
Confirm the prompt with "Yes"
The update is complete when the receiver restarts.
Getting Started:
the update takes about 10 minutes. The channel list is acquired. You should not use the default channel list, save your channel list before on the USB stick.
changes:
Problem on the fixed transponders on Astra 11 954 (3sat, ZDF, Kika, ZDF Ino, ZDF_neo, ZDF Culture)
Sincerely
Your VANTAGE - Support
[FONT=Arial, Helvetica, sans-serif]Release Note
Deutsch
WICHTIG, bitte lesen:
Sollten nach dem Update Probleme auftreten, führen Sie einen Werksreset mit dem Menüpunkt "Installation/Grundeinstellungen/Werkseinstellungen" durch.
Bitte sichern Sie vor dem Werksreset Ihre Einstellungen -> Menü/Softwaremanager/Systemsicherung.
So führen Sie ein Softwareupdate durch:
[/FONT]
[FONT=Arial, Helvetica, sans-serif][FONT=Arial, Helvetica, sans-serif]20.03.2012 Version 2.20M-O ( Link zur Software am Ende der Seite )
[/FONT][/FONT]
[FONT=Arial, Helvetica, sans-serif]
Erste Schritte:
- [FONT=Arial, Helvetica, sans-serif]Entpacken Sie die Datei auf einen USB-Datenträger.[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Jetzt verbinden Sie das USB Gerät mit den Receiver.[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Am Receiver wählen Sie über das Menü/Multimedia/Speichermedien/ USB das Updatefile "*.dlp" vom USB-Datenträger[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Bestätigen Sie die Abfrage mit "Ja"[/FONT]
- [FONT=Arial, Helvetica, sans-serif]Das Update ist abgeschlossen wenn der Receiver neu startet.[/FONT]
[/FONT]
[FONT=Arial, Helvetica, sans-serif] Änderungen:
- [FONT=Arial, Helvetica, sans-serif]das Update dauert ca. 10 Minuten. Die Kanalliste wird übernommen. Sollten Sie nicht die Standard Kanalliste verwenden, sichern Sie Ihre Kanalliste vorher auf den USB Stick.[/FONT]
[/FONT]
- [FONT=Arial, Helvetica, sans-serif] Problem mit der Standby-Schaltung bei Dualaufnahmen behoben. [/FONT]
[FONT=Arial, Helvetica, sans-serif] Mit freundlichen Grüßen
Euer VANTAGE – Support [/FONT]
Release Note
Deutsch
WICHTIG, bitte lesen:
Sollten nach dem Update Probleme auftreten, führen Sie einen Werksreset mit dem Menüpunkt "Installation/Grundeinstellungen/Werkseinstellungen" durch.
Bitte sichern Sie vor dem Werksreset Ihre Einstellungen -> Menü/Kanaleinstellungen/Softwaremanager/
So führen Sie ein Softwareupdate durch:
Sollte Ihr Receiver sind nach dem Start direkt aufhängen, gehen Sie wie folgt vor:
1-Ziehen Sie das Antennekabel des Receivers ab.
2-Schalten Sie den Receiver wieder an.
3-Der Receiver bootet nun normal und das Update kann wie unten beschrieben durchgeführt werden.
4-Nach dem Neustart des Receivers kann das Antennekabel wieder angesteckt werden
2.05.2012 Version 2.83 ( Link zur Software am Ende der Seite )
1-Entpacken Sie die Datei auf einen USB-Datenträger.
2-Jetzt verbinden Sie das USB Gerät mit den Receiver.
3-Am Receiver wählen Sie über das Menü/Multimedia/USB das Updatefile "*.dlp" vom USB-Datenträger
4-Bestätigen Sie die Abfrage mit "Ja"
5-Das Update ist abgeschlossen wenn der Receiver neu startet.
Erste Schritte:
das Update dauert ca. 5 Minuten. Die Kanalliste übernommen. Sollten Sie nicht die Standard Kanalliste verwenden, sichern Sie Ihre Kanalliste vorher auf den USB Stick.
Änderungen:
Abstürze nach der Analog-Abschaltung behoben.
Mit freundlichen Grüßen
Euer VANTAGE – Linux Support
Release Note
Deutsch
WICHTIG, bitte lesen:
Sollten nach dem Update Probleme auftreten, führen Sie einen Werksreset mit dem Menüpunkt "Installation/Grundeinstellungen/Werkseinstellungen" durch.
Bitte sichern Sie vor dem Werksreset Ihre Einstellungen -> Menü/Softwaremanager/Systemsicherung.
So führen Sie ein Softwareupdate durch:
23.04.2012 Version 2.22M-O ( Link zur Software am Ende der Seite )
Entpacken Sie die Datei auf einen USB-Datenträger.
Jetzt verbinden Sie das USB Gerät mit den Receiver.
Am Receiver wählen Sie über das Menü/Multimedia/Speichermedien/ USB das Updatefile "*.dlp" vom USB-Datenträger
Bestätigen Sie die Abfrage mit "Ja"
Das Update ist abgeschlossen wenn der Receiver neu startet.
Erste Schritte:
das Update dauert ca. 10 Minuten. Die Kanalliste wird übernommen. Sollten Sie nicht die Standard Kanalliste verwenden, sichern Sie Ihre Kanalliste vorher auf den USB Stick.
Änderungen:
Verbesserung der allgemeinen Performance
Mit freundlichen Grüßen
Euer VANTAGE – Support
Entpacken Sie die Datei auf einen USB-Datenträger.
Jetzt verbinden Sie das USB Gerät mit den Receiver.
Am Receiver wählen Sie über das Menü/Multimedia/Speichermedien/ USB das Updatefile "*.ltp" vom USB-Datenträger
Bestätigen Sie die Abfrage mit "Ja"
Das Update ist abgeschlossen wenn der Receiver neu startet.
Erste Schritte:
das Update dauert ca. 10 Minuten. Die Kanalliste wird übernommen. Sollten Sie nicht die Standard Kanalliste verwenden, sichern Sie Ihre Kanalliste vorher auf den USB Stick.
Änderungen:
Zugriff aus das neue Foxxum Portal